In this section:

If you require to change the time zone outside of the installation process, perform one of the procedures below.

Change Time Zone From EMA

  1. From the EMA menu bar, select All > System > NTP > Time Zone


  2. Select the Time Zone that you want to modify, from the Time Zone List.
    The window Edit Selected Time Zone appears below the window Time Zone List.



  3. Select a new time zone from the Zone drop-down list.




  4. Choose an option to continue:

    1. To undo the modifications, use the Undo Edits icon in the Edit Selected Time Zone window.

    2. If you are satisfied with your choice, click the Save icon.

      After clicking on the Save icon, clicking on the Undo Edits icon will not undo the changes. If the saved changes needs to be undone, the desired zone has to be selected from the Zone drop-down menu, and then saved again.

Change Time Zone From CLI

  1. Login to CLI and switch to Configure mode.

    > configure 


  2. To view current time zone, enter command:

    % show system ntp timeZone 
  timeZone FINCH { 
  zone gmtMinus07-Mountain; 
  }

  3. Enter following command to change time zone:

    % set system ntp timeZone <SYSTEM NAME> zone <time zone>

  4. To commit changes, enter commit and respond y when prompted.

    % commit 




  • No labels