In this section:

This allows you to create the entry for blocking.

To View Entry

On SBC main screen, go to Configuration > Profile Management > Category: Service Profiles > Class Of Service > Blocking > Entry.

Select the desired Class Of Service from the drop-down list to view its respective Blocking - Entry parameters.

The Entry window is displayed.

Figure 1: Profile Management - Service Profiles - Class Of Service - Blocking - Entry

To Edit Entry

To edit any of the Entry in the list, click the radio button next to the specific Entry name.

The Edit Selected Entry window is displayed below.

Figure 2: Profile Management - Service Profiles - Class Of Service - Blocking - Entry

Make the required changes and click Save at the right hand bottom of the panel to save the changes made.

To Create Entry

To create a new Entry, click New Entry tab on the Entry List panel.

Figure 3: Profile Management - Service Profiles - Class Of Service - Blocking - Entry Fields

The Create New Entry window is displayed.

Figure 4: Profile Management - Media Profiles - Tone Package - Tone Type Create Window

The following fields are displayed:

Table 1: Entry

Parameter Description
Called Number
This is the Called Number Address Digits, which are sent out on the egress signaling side. It is the end result of any digit manipulations and address translation that might have been performed by the SBC during the policy request processing on the called number that was received from ingress signaling.
CountryThe country code.
Call Type

Select the Call Type:

  • Private
  • National Operator
  • Local Operator
  • National Type
  • International Type
  • International Operator
  • Long Distance Operator
  • IP VPN Service
  • Test
  • Transit
  • Carrier Cut Through
  • Other Carrier Chosen
  • User Name
  • Mobile

To Copy Entry

To copy any of the created Entry and to make any minor changes, click the radio button next to the specific Entry to highlight the row.

Click Copy Entry tab on the Entry List panel.

Figure 5: Profile Management - Service Profiles - Class Of Service - Blocking - Entry Fields

The Copy Selected Entry window is displayed along with the field details which can be edited.

Figure 6: Profile Management - Service Profiles - Class Of Service - Blocking - Entry Copy Window

Make the required changes to the required fields and click Save to save the changes. The copied Entry is displayed at the bottom of the original Entry in the Entry List panel.

To Delete Entry

To delete any of the created Entry, click the radio button next to the specific Entry which you want to delete.

Click Delete at the end of the highlighted row. A delete confirmation message appears seeking your decision.

Click Yes to remove the specific Entry from the list.


  • No labels