Use the DSP Usage Interval Statistics window to view DSP resource usage, per codec, for a series of statistics intervals. To set the statistics time interval and the number of intervals to report, refer to System - Interval Statistics.
On the SBC main screen, go to Monitoring > System > Category: System Status and Statistics > DSP Res > DSP Usage Interval Statistics or
All > System > DSP Res > DSP Usage Interval Statistics
The DSP Usage Interval Statistics window opens.
Figure 1: DSP Usage Interval Statistics
The following output is displayed:
Table 1: DSP Usage Interval Statistics
Parameter | Description | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Number | Specifies a sequence number which identifies the interval for which the set of statistics is shown. | ||||||||||||
System Name | The node name. | ||||||||||||
Interval Valid | A setting of 'true' indicates the interval contains valid data during the time interval. Each interval is for a configurable fixed time (default interval is 15 minutes) starting on the hour. For example, if the system starts at 12:05, the first interval at 12:15 will not be valid because it is less than the 15-minute interval. Subsequent intervals will be valid upon meeting the 15-minute time interval. System switch-overs also cause invalid intervals because data is lost during the interval.
| ||||||||||||
Time | System up time when the interval statistics were collected. | ||||||||||||
The following statistics appear for each codec. Statistics are collected once per second.
The following codecs appear:
NOTE: When collecting statistics, the following are considered separate codecs:
For more information, refer to Audio Codecs. |