In this section:
Specifies the details about Response policer.
To View and Edit Response
On SBC main screen, go to Configuration > System Provisioning > Security Configuration > Sip Cac Profile > Response.
Select the desired Sip Cac Profile from the drop-down list to view its respective Response parameters.
The Response window is displayed.
Figure 1: Security Configuration - Sip Cac Profile -Response
The following fields are displayed:
Table 1: Response Parameters
Parameter | Description |
|---|---|
| Specifies the preference for RESPONSES within the ingress aggregate policer. The value range from 1 - 10. The default value is 1. |
| Specifies the maximum burst size for ingress RESPONSES. The value range from 1 - 10000. The default value is 1. |
| Specifies the maximum ingress RESPONSES rate in Other Requests per period. The value range from 1 - 1000 or |
| Specifies the time period (in seconds) over which ingress RESPONSES rate applies. The value range from 1 - 10 seconds. The default value is 1 second. |
| Specifies the preference for RESPONSES within the egress aggregate policer. The value range from 1 - 10. The default value is 1. |
| Specifies the maximum burst size for egress RESPONSES. The value range from 1 - 1000. The default value is 1. |
| Specifies the maximum egress RESPONSES rate in aggregate messages per period. The value range from 1 - 1000 or |
| Specifies the time period (in seconds) over which egress RESPONSES rate applies. The value range from 1 - 10 seconds. The default value is 1 second. |
Make the required changes and click Save at the right hand bottom of the panel to save the changes made.
Overview
Content Tools