In this section:
To View SIP XHeader Profile
On the SBC main screen, navigate to All → Profiles → Signaling →SIP XHeader Profile.
The SIP XHeader Profile window opens:
To Create a SIP XHeader Profile
To create a new SIP XHeader Profile:
Click New SIP XHeader Profile. The Create New SIP XHeader Profile window opens.
- Use the following table to configure the parameters and then click Save.
SIP XHeader Profile Parameters
Parameter
Length/Range
Description
M/O
SIP XHeader Profile
1-23 characters
Specifies the name of the SIP XHeader Profile to attach to a SIP trunk group to support various call transfer scenarios.
For more information, refer to REFER Relay and INVITE with Replaces.
O
State
N/A
Enables/disables the SIP XHeader Profile.
Disabled (default) – Disables the SIP XHeader Profile.
Enabled – Enables this profile, which adds SIP XHeaders to the outgoing messages, or parses them from the incoming messages.
O
To Edit a SIP XHeader Profile
To edit a SIP XHeader Profile:
- Click the radio button adjacent to the name of the SIP XHeader Profile you want to edit. The Edit Selected SIP XHeader Profile window opens.
- Make any required changes to the profile and click Save.
To Copy a SIP XHeader Profile
To copy a SIP XHeader Profile:
- Click the radio button adjacent to the name of the SIP XHeader Profile you want to copy.
- Click Copy SIP XHeader Profile. The Copy Selected SIP XHeader Profile window opens.
- Make any required changes to the profile and click Save.
To Delete a SIP XHeader Profile
To delete a SIP XHeader Profile:
- Click the radio button adjacent to the name of the SIP XHeader Profile you want to delete.
- Click the delete icon (X) at the end of the row.
- Confirm the deletion when prompted.