In this Section:
Use the object DSCP Profile
to configure the DSCP values for HPC and non-HPC calls.
The use of the GETS SOFTWARE is restricted in the U.S. and U.S. TERRITORIES to NS/EP users authorized by the Office of the Manager, National Communications System (OMNCS).
Log on to the EMA as admin
and navigate to All > Profiles > Services > DSCP Profile. The DSCP Profile List window displays.
Figure 1: DSCP Profile List
Create New DSCP Profile
- Click +New DSCP Profile on the DSCP Profile List window.
The Create New DSCP Profile window displays.
Edit the fields in the window.
Table 1: DSCP Profile - fields descriptionsParameter Length/Range Default Description M/O Name
1-23 characters N/A Name of the DSCP profile used to configure the SBC for HPC and non-HPC calls. M State
N/A Disabled
Use this flag to enable or disable the DSCP profile.
Disabled
(default)Enabled
O DSCP Value
0-63
0
Specifies the DSCP value reserved for non-HPC calls. O Hpc Dscp Value
0-63
0
Specifies the DSCP value reserved for HPC calls. O - Click Save.
A success message displays.
Edit Selected DSCP Profile
Select the radio button corresponding to DSCP Profile in the DSCP Profile List window.
The Edit Selected DSCP Profile window displays.
- Edit the fields in the window.
- Click Save.
Copy Selected DSCP Profile
- Select the radio button corresponding to DSCP Profile in the DSCP Profile List window.
- Click Copy DSCP Profile on the DSCP Profile List window.
The Copy Selected DSCP Profile window displays.
- Edit the fields in the window.
- Click Save.
Delete Selected DSCP Profile
- Select the radio button corresponding to DSCP Profile in the DSCP Profile List window, and click the delete icon at the end of the selected row.
The Delete dscpProfile prompt displays.
- Click Yes to confirm the delete prompt.
A success message displays.