In this section:
This profile determines which calls can be classified as emergency calls. An incoming call will be classified as an emergency call if the URN matches this prefix.
To View Emergency Call Profile
On SBC main screen, go to Configuration > Profile Management > Category: Service Profiles > Emergency Call Profile.
The Emergency Call Profile window is displayed.
Figure 1: Profile Management - Service Profiles - Emergency Call Profile
To Edit Emergency Call Profile
To edit any of the Emergency Call Profile in the list, click the radio button next to the specific Emergency Call Profile name.
The Edit Selected Emergency Call Profile window is displayed below.
Figure 2: Profile Management - Service Profiles - Emergency Call Profile
Make the required changes and click Save at the right hand bottom of the panel to save the changes made.
To Create Emergency Call Profile
To create a new Emergency Call Profile, click New Emergency Call Profile tab on the Emergency Call Profile List panel.
Figure 3: Profile Management - Service Profiles - Emergency Call Profile Fields
The Create New Emergency Call Profile window is displayed.
Figure 4: Profile Management - Service Profiles - Emergency Call Profile Create Window
The following fields are displayed:
Table 1: Emergency Call Profile
Parameter | Description |
---|---|
| Specify the name of emergency call. |
| This parameter controls the SBC behavior of whether SIP cpc=priority can be used for emergency call indication or not. |
| This parameter controls the behavior if the SIP X-EMG header can be used for emergency call indication. The values are: |
Res Priority Header Profile | Specifies the name of the existing RPH profile that should be used for classifying a call as emergency call based on RPH in the initial ingress INVITE. |
Sos In Contact Of Register | A registration received with a "sos" parameter in the contact header is considered an emergency registration, if it is enabled on the emergency call profile configured on the ingress trunk group. Options are:
|
To delete any of the created Emergency Call Profile, click the radio button next to the specific Emergency Call Profile which you want to delete.
Click Delete at the end of the highlighted row. A delete confirmation message appears seeking your decision.
Click Yes to remove the specific Emergency Call Profile from the list.