In this section:
Use this object to configure Policy-related settings for a specified SIP trunk group.
As a best practice, always use UPPERCASE for trunk group names.
Command Syntax
% set addressContext <name> zone <name> sipTrunkGroup <name> policy callNotificationCriteriaGroup <group ID> callRouting elementRoutingPriority <ERP profile name> carrier <serving carrier code> country <country code> digitParameterHandling egressDmPmRule <rule> ingressDmPmRule <rule> numberingPlan <numbering plan> featureControlProfile <profile name> ingress flags hdPreferredRouting <disable | enable> hdSupportedRouting <disable | enable> nonZeroVideoBandwidthBasedRoutingForH323 <disable | enable> nonZeroVideoBandwidthBasedRoutingForSip <disable | enable> ipSignalingPeerGroup <name> localizationVariant <generic | japan | northAmerica> media <packetServiceProfile | toneAndAnnouncementProfile> preferredIdentity <disable | enable> services classOfService <COS profile name> signaling ipSignalingProfile <profile name> signalingProfile <profile name> sipDomain <domain name> tgIPVersionPreference <both-ipv4-and-ipv6 | ipv4-only | ipv6-only>
Command Parameters
SIP Trunk Group Policy Parameters
SIP Trunk Group Policy Parameters
Parameter | Description |
---|---|
callNotificationCriteriaGroup | Specifies the name of the call notification criteria group to attach to the trunk group to trigger call notifications. Refer to Servers - Call Notification - CLI for more information on call notification criteria groups. Refer to Sending Unsolicited Call Notifications to Application Servers for more information on the SBC's call notification feature. |
callRouting | Route a call or request to the next-hop entity.
|
carrier | The serving carrier code. |
country | The serving country code. |
digitParameterHandling | Use this object to specify digit parameter handling for this trunk group for this trunk group. (See the Digit Parameter Handling Parameters table below for details). |
| The name of the Feature Control Profile to associate with this trunk group. NOTE: The |
| Use this parameter to configure the following route prioritization flags for this ingress trunk group. (See the Ingress Flags table below for details) |
ipSignalingPeerGroup | The name of the IP Signaling Peer Group to associate with this trunk group. |
localizationVariant | Specifies the parameters and controls used for localization variant for this trunk group.
|
media | Select the profile associated with media policy for this SIP trunk group.
|
| This flag is used to populate the originating identity (P-Asserted-Identity, From, Remote-Party-Identity headers) for calls initiated by any of the AoRs in the group. The options are:
When this flag is enabled, the configured Preferred Identity is used to populate the originating identity of (From, Contact, P-Asserted-Identity, Remote-Party-Identity, Preferred-Identity) headers of the egress INVITE. When this flag is enabled, the configured Preferred Identity is not used to populate any of the originating identity of (From, Contact, P-Asserted-Identity, Remote-Party-Identity, Preferred-Identity) headers of the egress INVITE. |
services | The service associated with various enhanced services and features for this SIP trunk group.
|
signaling | Identifies the parameters controlling the specifics of the SIP signaling for this SIP trunk group.
|
sipDomain | The domain string used when SIP signaling requires a configured domain name. |
tgIPVersionPreference | Use this flag to choose the IP address preference on the ingress Trunk Group.
|
Digit Parameter Handling Parameters
Digit Parameter Handling Parameters
Parameter | Description |
---|---|
egressDmPmRule | The name of Digit Manipulation and Parameter Manipulation profile applied at the egress. |
ingressDmPmRule | The name of Digit Manipulation and Parameter Manipulation profile applied at the ingress. |
numberingPlan | The name of the Numbering Plan profile. |
Ingress Flags
Ingress Flags
Parameter | Description |
---|---|
hdPreferredRouting | Enable flag on ingress trunk group to use PSX HD Preferred Routing strategy.
NOTE: When this flag is enabled, the "nonZeroVideoBandwidthBasedRouting..." flags are disabled. Do not use this flag on Egress trunk groups. |
hdSupportedRouting | Enable flag on ingress trunk group to use PSX HD Supported Routing strategy.
NOTE: When this flag is enabled, the "nonZeroVideoBandwidthBasedRouting..." flags are disabled. Do not use this flag on Egress trunk groups. |
nonZeroVideoBandwidthBasedRoutingForH323 | Enable this flag on ingress trunk group to give priority to routes with non-zero video bandwidth in H.323 video calls.
|
nonZeroVideoBandwidthBasedRoutingForSip | Enable this flag on ingress trunk group to give priority to routes with non-zero video bandwidth in SIP video calls.
INFO: Refer to PSX Manager documentation for details of these features. |