In this section:
Use the Location window to associate a location value with a specified reason code within a specified crankback profile. When a location is configured and enabled, the specified location value must be included along with the reason code in the egress disconnect signaling to trigger crankback. Including a location with a reason code is optional. Refer to Call Routing - Crankback Profile and Crankback Profile - Reason for information on creating crankback profiles and adding termination reason codes to them.
To View Reason Locations
On the SBC main screen, go to Configuration > Profile Management > Category: Call Routing Profiles > Crankback Profile > Reason > Location or
All > Profiles > Call Routing > Crankback Profile > Reason > Location. The Location window lists any locations currently associated with a reason code in a crankback profile.
Use the Crankback Profile list to filter the list for a specific profile and the Reason list to select a specific reason code.
To Add a Location
To associate a location with a reason code in a specified crankback profile:
- Select the crankback profile from the Crankback Profile list and select the reason code from the Reason list.
- Click New Location.
- In the Index list, select the location you want to associate with the selected reason code within the selected crankback profile. The options are:
- User
GW Link Failure: This option allows a GW-GW signaling link (TCP connection) failure to initiate call crankback.
To configure a crankback profile to crankback for GW-GW link failures only:- Create the profile on the Crankback Profile window.
On the Reason window, select the crankback profile and add reason code 3 and set its Use Location Value to Enabled.
On the Location window, select the crankback profile and reason code 3 and select the location GW Link Failure.
- International Net – International network.
- NAT Reserved6 – Reserved
- NAT Reserved12 – Reserved
- Net Beyond Inter Point – Network beyond interworking point (BI).
- Private Local – Private network serving the local user (LPN).
- Private Remote – Private network serving the remote user (RPN).
- Public Local – Public network serving the local user (LN).
- Public Remote – Public network serving the remote user (RLN).
- Transit Net – Transit network (TN)
- Click Save.
Note that a location can only be viewed and cannot be edited after creation.
To Copy a Location
To copy a location to associate another location value with a reason code within a specific profile:
- Select the crankback profile from the Crankback Profile list and select the reason code from the Reason list.
- Click the radio button next to a location value currently associated with the reason code.
- Click Copy Location.
- Select another location for the Index list.
- Click Save.
To Delete a Location
To delete a location associated with a reason code within a specific profile:
- Select the crankback profile from the Crankback Profile list and select the reason code from the Reason list.
- Click the radio button next to the specific location value that you want to delete.
- Click the Delete (X) icon at the end of the row.
- Confirm the deletion when prompted.