To View and Edit Flags
On the SBC main screen, go to Configuration > System Provisioning > Category: SIP Carrier Peering > Sip Trunk Group > Policy > Ingress > Flags or
All > Address Context > Zone > SIP Trunk Group > Policy > Ingress > Flags
Select the appropriate Address Context, Zone, and SIP Trunk Group from the drop-down lists. The Flags window is displayed.
Figure 1: Ingress Flags Window
Use the following table to set the flag values for a trunk group.
Table 1: SIP Trunk Group Ingress Flags
Parameter | Description |
---|---|
Non Zero Video Bandwidth Based Routing for SIP | Specifies whether or not to use the non-zero video bandwidth for routing SIP calls. The options are:
|
Non Zero Video Bandwidth Based Routing For H323 | Specifies whether or not to use the non-zero video bandwidth for routing H323 calls. The options are:
|
Hd Preferred Routing | Specifies whether or not HD Preferred Routing is required for routing SIP calls. The options are:
|
Hd Supported Routing | Specifies whether or not HD Supported Routing is required for routing SIP calls. The options are:
|
Make the required changes and click Save.