This object specifies the remote Identity that SBC asserts to the Peer during phase 1 authentication.

On SBC main screen, navigate to All > Address Context > Ipsec > Peer > Remote Identity.

The Remote Identity can be checked for each Address Context and Peer or all the Address Contexts and Peers. Use the drop-down boxes to select the desired Address Context and Peer.

Figure 1: All - Address Context - Ipsec - Peer - Remote Identity

The Remote Identity window is displayed.

The following fields are displayed:

Table 1: Local Identity Parameters

Parameter

 Description

fqdn <domainName>
This parameter specifies that the remote identity will be presented in Fully Qualified Domain Name (FQDN) format, taking as its value the FQDN of the SBC, specified by the next argument such as westford.example.com.
ipV4Addr <ipAddress>
This parameter specifies that the remote identity will be presented in IPv4 address dotted decimal format, taking as its value the IP address of the SBC specified by the next argument (example: 128.127.50.224).
ipV6Addr <ipAddress>

This parameter specifies that the remote identity will be presented in IPv6 address hexadecimal/colon format, taking as its value the IP address of the SBC specified by the next argument (example: 1280:1276:3350:2224:2222:3333:8888:1245 or fd00:21:445:128::7880).

Make the required changes and click Save at the right hand bottom of the panel to save the changes made.


  • No labels