This object specifies the parameters associated with DTLS Flags. These are supporting parameters for DTLS objects.

To View and Edit Dtls Flags

On SBC main screen, go to All > Profiles > Media > Packet Service Profile > DTLS > Dtls Flags.

Select the desired Packet Service Profile from the drop-down list to view its respective Dtls Flags parameters.

The Dtls Flags window is displayed.

Figure 1: Packet Service Profile - DTLS - Dtls Flags

The following parameters are displayed:

Table 1: Packet Service Profile - Dtls Flags parameters

Parameter

Description

Allow Dtls Fallback

When enabled, specifies a fall back to standard RTP when crypto attribute negotiation fails. The options are:

  • Disable (default)
  • Enable
Enable Dtls Srtp

When enabled, this parameter enables the secure RTP. The options are:

  • Disable (default)
  • Enable
DTLS Srtp Relay

When enabled SBC relays DTLS-sRTP audio and video streams. The options are:

  • Disable (default)
  • Enable

DTLS Srtp Relay flag appears only when Enable Dtls Srtp flag is set to Enable.


DTLS SCTP RelayWhen enabled SBC relays DTLS/SCTP streams. The options are:
  • Disable (default)
  • Enable

Make the required changes and click Save at the right hand bottom of the panel to save the changes made.


  • No labels