IMPORTANT
The SBC 5100, SBC 5110, SBC 5200, and SBC 5210 platforms are no longer supported beginning with the SBC Core 10.0.0R0 release. This release supports SBC 5400/7000/SWe platforms. Contact Ribbon Sales for upgrade information.
This section includes the following topics for installing and configuring the SBC 7000 software components.
Software Installation Overview
Creating an IP Plan
Configuring the SBC 7000 Platform
- Configuring SBC 7000 BMC IP Address Via Serial Console
- Configuring SBC 7000 BMC for Remote Access
- Configuring SBC 7000 Host Network Management Interface
- Configuring NTP Server Settings Using SBC 7000 BMC
- Uploading New SSL Certificates using SBC 7000 BMC
- Changing the SBC 7000 BMC Password
- Launching the Remote Console from the SBC 7000 BMC
Installing SecureLink for Remote Access
Installing SBC Application
- Downloading Software from the Ribbon Support Portal
- Uploading SBC Package to SBC Platform
- Setting Up Physical Connection between High Availability Nodes
- Gathering Information for SBC Installation
- Installing SBC Standalone
- Installing SBC HA
Re-Installing ConnexIP Operating System for SBC 7000 Series
Configuring the SBC 5000 Series Platform
- Configuring BMC IP Address Via Serial Console
- BMC Brute-Force Password Guessing
- Configuring SBC 5xx0 BMC for Remote Access
- Configuring the Host Network Management Interface
- Configuring NTP Server Settings Using the BMC
- Uploading New SSL Certificates using the BMC
- Changing the BMC Password
- Launching the Remote Console from the BMC
Re-Installing ConnexIP Operating System for SBC 5000 Series
The SBC Core system is a closed network device. Customer modifications at the Linux level are not allowed or supported. These modifications can cause stability, update and fail-over issues. Customers should only configure the SBC using the supported interfaces (Ribbon SBC Core CLI, RESTCONF API, EMA, or Ribbon EMS).
Warning
Overview
Content Tools