Use the Daughter Board Status window to view the status of SBC Daughter Board modules in the SBC 7000 system.
Not applicable to the SBC Software Edition (SWe).
On the SBC main screen, go to Monitoring > System > Category: Hardware Status > Daughter Board Status or
All > System > Daughter Board Status
The Daughter Board Status window opens.
Figure 1: Daughter Board Status
The following output is displayed:
Table 1: Daughter Board Status Parameters
Parameter | Description |
---|---|
Server Name | Server name. |
Slot | Specifies the slot associated with the board. |
Daughter Board ID | Daughter board identifier. SBC 7000:
|
Present | Indicates if the module is present (True or False). |
Product Name | Identifies manufacturer module name (if present). |
Serial Num | Identifies the serial number of the module (if present). |
Operational Status | Operational state of daughter board.
|
Image Load Failure Count | Number of module boot failures since the last successful module boot, for use during diagnostic testing of a potentially failed module. NOTE: This maintenance field does not apply to SPS100 cards. |
Fpga Version | A card’s programmed firmware version (using the FPGA build date). NOTE: This maintenance field does not apply to SPS100 cards. |