For a High Availability (HA) pair configuration, the SBC Core allows configuring a Static Route for a specific host or CE Name among the active and standby hosts of a HA pair configuration using the Condition element. The Condition element store the conditions on the basis of which routes are added to a SBC pair with HA configuration. Currently, the Condition element only supports the CE Name element.

Note
  • Before configuring the Condition using a specific CE Name, ensure that IP Interface Group Name and IP Interface Name are configured. These three elements cannot be configured and saved simultaneously. For further details, refer to System Provisioning - IP Interface Group and IP Interface Group - IP Interface.
  • Static Routes with specific CE Name can be added only for packet interfaces.

On the SBC main screen, navigate to All > Address Context > Static Route > Condition.

The Condition window is displayed.

Figure 1: Condition Window

Select appropriate values from the Address Context and Static Route drop-down lists. Select the CE Name from the drop-down list. 

To save the changes, click Save. To cancel all changes, click Undo Edits.

The parameters in the Condition window is described below:

Table 1: Parameters - Condition window

ParameterDescription
Condition

An element in the Static Route configuration that holds the conditions on the basis of which routes are added to a SBC pair with HA configuration.

Currently, Condition supports only one child element - CE Name.

CE NameThe name (1 - 255 characters) of the computing element that hosts the port used by the IP interface.


Note
  • The SBC does not allow to edit the Condition for a Static Route. To change the configuration of Condition, delete the Static Route and reconfigure it.
  • The SBC does not allow to delete the CE Name separately.
  • A Static Route is deleted only from the instance in which it is configured, and not from both active and standby instances of a HA pair SBC configuration.



  • No labels