DO NOT SHARE THESE DOCS WITH CUSTOMERS!

This is an LA release that will only be provided to a select number of PLM-sanctioned customers (PDFs only). Contact PLM for details.

 

The SBC Core supports SIP message that include the maddr parameter in the following scenarios by enabling the SIP Trunk Group signaling flag honorMaddrParam:

  • maddr is received in 3xx response's Contact Header

  • maddr is present in 18x or 200 OK response's Contact Header

  • maddr is present in incoming request’s Contact Header
  • maddr is present in Refer-To Header

The SBC supports a maddr value of IPv4, IPv6 and FQDN (resolving to either IPv4 or IPv6).

When maddr is present in the received SIP request’s Contact Header or in the Contact header of 18x, 20x, and 3xx, the SBC uses it as the remote target.

When routing based on the maddr value, SBC uses the port information present in the received Contact (or Refer-To) header. Additionally, the SBC uses the transport parameter present in the Contact as the new request's transport parameter.

For configuration details, refer to:

  • No labels