DO NOT SHARE THESE DOCS WITH CUSTOMERS!
This is an LA release that will only be provided to a select number of PLM-sanctioned customers (PDFs only). Contact PLM for details.
In this section:
Specifies the details about the Aggregate Message policer.
On SBC main screen, go to Configuration > System Provisioning > Security Configuration > Sip Cac Profile > Aggregate Message.
Select the desired Sip Cac Profile from the drop-down list to view its respective Aggregate Message parameters.
The Aggregate Message window is displayed.
Security Configuration - Sip Cac Profile - Aggregate Message
The following fields are displayed:
Aggregate Message Parameters
Parameter | Description |
---|---|
| Specifies the maximum burst size for ingress aggregate message. The value range from 1 - 10000. The default value is 10. |
| Specifies the maximum ingress aggregate message rate in aggregate messages per period. The value range from 1 - 1000 or |
| Specifies the time period (in seconds) over which ingress aggregate message rate applies. The value range from 1 - 10 seconds. |
| Specifies the maximum burst size for egress aggregate messages. The value range from 1 - 1000. The default value is 10. |
| Specifies the maximum egress aggregate message rate in aggregate messages per period. The value range from 1 - 1000 or |
| Specifies the time period (in seconds) over which egress aggregate message rate applies. The value range from 1 - 10 seconds. |
Make the required changes and click Save at the right hand bottom of the panel to save the changes made.