DO NOT SHARE THESE DOCS WITH CUSTOMERS!
This is an LA release that will only be provided to a select number of PLM-sanctioned customers (PDFs only). Contact PLM for details.
Use this object to configure the Post-Dial Delay (PDD) performance requirement which consists of a timeout value and response code.
On the SBC main screen, go to Configuration > System Provisioning > Category: SIP Carrier Peering > Signaling > Post Dial Delay. The Post Dial Delay window is displayed.
The Ingress PDD timer is activated when the configured value on the ingress trunk group is greater than zero and the incoming SIP call reaches an address complete state. The Egress PDD timer is activated when the configured value on the egress trunk group is greater than zero and upon receipt of the 100 Trying message from the egress peer. The Egress PDD timer is canceled upon receipt of a 18x/200/3xx/4xx/5xx message from the egress peer. The Post Dial Delay can be checked for each Address Context, for each Zone, for each SIP Trunk Group created or for all the Address Contexts, Zones and SIP Trunk Groups created. Use the drop-down box to select the desired Address Context, Zone and SIP Trunk Group. The Edit Post Dial Delay window is displayed. SIP Carrier Peering - Signaling - Post Dial Delay The following fields are displayed: Post Dial Delay parameters Parameter Description Time Out The timeout value, in milliseconds, if the Post Dial Delay is enabled. Response Code Make the required changes and click Save at the right hand bottom of the panel to save the changes made.Length/Range 0-20000 400-699 The SIP response code sent to ingress and egress if the call is torn down due to PDD timer expiry.