DO NOT SHARE THESE DOCS WITH CUSTOMERS!
This is an LA release that will only be provided to a select number of PLM-sanctioned customers (PDFs only). Contact PLM for details.
In this section:
Use this object to define ingress IP prefixes. Up to 128 Ingress IP Prefix entries may be assigned to a SIP trunk group. Ingress peers matching these ingress IP prefixes are assigned to the specified SIP trunk group.
On the SBC main screen, go to Configuration > System Provisioning > Category: Trunk Provisioning > Trunk Group > SIP Trunk Group > Ingress IP Prefix. The Ingress IP Prefix window is displayed.
Use the drop-down lists to select the desired Address Context, Zone, and SIP Trunk Group.
System Provisioning - Ingress IP Prefix
To create a new Ingress IP Prefix, click New Ingress IP Prefix. The Create New Ingress IP Prefix window is displayed.
System Provisioning - Ingress IP Prefix Create Window
Use the following table to enter values and click Save.
System Provision - Ingress IP Prefix Parameters
Parameter | Description |
---|---|
IP Address | Specifies the IPv4 or IPv6 address of an ingress peer. Enter the address in the following format:
|
Prefix Length | Specifies the number of bits in the address which form the network part of the IP address. The rest of the bits (128 – prefix length) specify the host part of the IP address. The value ranges from 0 to 128 and the default value is 32. |