DO NOT SHARE THESE DOCS WITH CUSTOMERS!
This is an LA release that will only be provided to a select number of PLM-sanctioned customers (PDFs only). Contact PLM for details.
In this section:
Use the SIP JJ9030 Interworking profile to configure parameters needed for SIP JJ9030 Interworking. For information on other related profiles for SIP-ISUP and interworking between different SIP flavors, refer to Support for SIP-ISUP.
To configure the signaling profile sipJJ9030InterworkingProfile
, use the following syntax:
% set profiles signaling sipJJ9030InterworkingProfile <profile name 1-23 characters> addUserEqualPhoneforDivHiInterworking <disabled | enabled> bciCalledPartyCategory <noIndication | ordinary | payphone | spare> bciChargeIndicator <charge | noCharge | noIndication | spare> bciTerminatingIsdnAccess <isdn | nonIsdn> chargeAreaInformation <5 digits [0-9]> origIoi <1-128 characters> originatingCarrierCode <4 digits [0-9]> setHiPresentationRestricted <disabled | enabled> sipFlavor JJ9030 SIP-T SIP-ttc-charging-params X-Header terminatingCarrierCode <4 digits [0-9]> termIoi <1-128 characters> transitIcidInInvite <disabled | enabled> transitPcv <disabled | enabled>
The parameter descriptions for profiles signaling
are as follows:sipJJ9030InterworkingProfile
Parameter Description - sipJJ9030InterworkingProfile
Parameter | Length/Range | Description |
---|---|---|
sipJJ9030InterworkingProfile | 1-23 characters |
NOTE: The SBC allows configuring a maximum of 32 |
addUserEqualPhoneforDivHiInterworking | N/A | Enable this parameter to add "user=phone" and the "mp" parameter for
For more information on |
bciCalledPartyCategory | N/A | The Backwards Call Indicators Called Party Category.
NOTE: This parameter is mandatory when the parameter |
bciChargeIndicator | N/A | The Backwards Call Indicators Charge Indicator.
NOTE: This parameter is mandatory when the parameter |
bciTerminatingIsdnAccess | N/A | The Backwards Call Indicators Terminating ISDN Access Indicator.
NOTE: This parameter is mandatory when the parameter |
chargeAreaInformation | 5 digits (0-9 ) | The Charge Area Information, consisting of 5 digits (0-9). |
origIoi | 1-128 characters | The name of Originating Inter Operator Identifier. |
originatingCarrierCode | 4 digits (0-9 ) | The Originating Carrier Code, consisting of 4 digits (0-9). Note: This parameter is mandatory when the parameter |
setHiPresentationRestricted | N/A | Set Presentation Indicator as "restricted" for
For more information on |
sipFlavor | N/A | The type of SIP parameters and procedures used for this interworking profile.
|
terminatingCarrierCode | 4 digits (0-9 ) | The Terminating Carrier Code, consisting of 4 digits (0-9). |
termIoi | 1-128 characters | The name of the Terminating Inter Operator Identifier. |
transitIcidInInvite | N/A | When enabled, the SBC transits the icid-value in P-Charging-Vector transparently in the INVITE sent on the current trunk for JJ90.30 to JJ90.30 calls.
Note:
|
transitPcv | N/A | When enabled, the SBC transits icid-value, orig-ioi and term-ioi of P-Charging-Vector transparently in JJ90.30 to JJ90.30 calls, using the current trunk group.
Note:
|
The SBC allows configuring a maximum of 32 sipJJ9030InterworkingProfile
(s).
To configure sipJJ9030InterworkingProfile
with the parameter sipFlavor
set to JJ9030
, refer to the example below:
% set profiles signaling sipJJ9030InterworkingProfile test_sip_JJ9030 sipFlavor JJ9030 origIoi test_origIoi termIoi test_termIoi originatingCarrierCode 9999 chargeAreaInformation 56789 % commit
The parameter originatingCarrierCode
is mandatory only when you set sipFlavor
to JJ9030
. For other values of the parameter sipFlavor
, configuration of originatingCarrierCode
is optional.
To configure sipJJ9030InterworkingProfile
with the parameter sipFlavor
set to SIP-T
, refer to the example below:
% set profiles signaling sipJJ9030InterworkingProfile test_2_sip_JJ9030 sipFlavor SIP-T origIoi test_origIoi termIoi test_termIoi chargeAreaInformation 98765 % commit
To configure sipJJ9030InterworkingProfile
with the parameter sipFlavor
set to SIP-ttc-charging-params
, refer to the example below:
% set profiles signaling sipJJ9030InterworkingProfile test_3_sip_JJ9030 sipFlavor SIP-ttc-charging-params origIoi test_origIoi termIoi test_termIoi chargeAreaInformation 45679 bciCalledPartyCategory payphone bciChargeIndicator noCharge bciTerminatingIsdnAccess isdn % commit
The following parameters are mandatory only when you set sipFlavor
to SIP-ttc-charging-params
:
bciCalledPartyCategory
bciChargeIndicator
bciTerminatingIsdnAccess
For other values of the parameter sipFlavor
, these parameters are optional.
To configure sipJJ9030InterworkingProfile
with the parameter sipFlavor
set to X-Header
, refer to the example below:
set profiles signaling sipJJ9030InterworkingProfile test_sip_JJ9030 sipFlavor X-Header origIoi test_origIoi termIoi test_termIoi originatingCarrierCode 9999 chargeAreaInformation 56789 commit
To display the configured sipJJ9030InterworkingProfile
, refer to the example below:
> show table profiles signaling sipJJ9030InterworkingProfile ADD USER EQUAL BCI ORIGINATING TERMINATING PHONEFOR DIV SET HI BCI CALLED BCI CARRIER CARRIER CHARGE AREA HI PRESENTATION CHARGE PARTY TERMINATING NAME SIP FLAVOR ORIG IOI TERM IOI CODE CODE INFORMATION INTERWORKING RESTRICTED INDICATOR CATEGORY ISDN ACCESS ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------- test_2_sip_JJ9030 SIP-T test_origIoi test_termIoi - - 98765 disabled disabled - - - test_3_sip_JJ9030 SIP-ttc-charging-params test_origIoi test_termIoi - - 45679 disabled disabled noCharge payphone isdn test_sip_JJ9030 JJ9030 test_origIoi test_termIoi 9999 - 56789 disabled disabled - - -
To attach the configured sipJJ9030InterworkingProfile
with a sipTrunkGroup
, refer to the example below:
% set addressContext default zone defaultSigZone sipTrunkGroup test_sip signaling sipJJ9030InterworkingProfile test_sip_jj9030 % commit
To delete the configured sipJJ9030InterworkingProfile
, refer to the example below:
If the sipJJ9030InterworkingProfile
is attached to a sipTrunkGroup
, detach the profile before you attempt to delete it. To detach, use the following syntax:
%
delete addressContext <address_context> zone <zone>
sipTrunkGroup <sip_tg> signaling sipJJ9030InterworkingProfile
Commit the command to complete the process of deletion.
% delete profiles signaling sipJJ9030InterworkingProfile test_sip_jj9030 % delete profiles signaling sipJJ9030InterworkingProfile test_2_sip_jj9030 % delete profiles signaling sipJJ9030InterworkingProfile test_3_sip_jj9030 % commit
When using the JJ90.30 standard to improve interconnectivity between IMS networks within Japan, the SBC Core may need to transit some or all of the P-Charging-Vector parameters: icid-value
, orig-ioi
, and term-ioi
. To support this functionality, the SBC includes the configurable signaling parameters, transitPcv
and transitIcidInInvite,
in the SIP JJ90.30 Interworking profile.
The following diagrams illustrate some sample use cases of the configuration options:
Call from SIP to JJ90.30 (IN) to JJ99.30
Call from JJ90.30 to SIP
Call from JJ90.30 to JJ90.30