DO NOT SHARE THESE DOCS WITH CUSTOMERS!
This is an LA release that will only be provided to a select number of PLM-sanctioned customers (PDFs only). Contact PLM for details.
In this section:
This section provides information on the SBC 5000 series package content and required tools to rack mount the SBC platform.
Required Tools
Before you install the SBC chassis into a rack, make sure that you have the following tools and equipment:
- #2 Phillips screwdriver (to install brackets and the chassis)
- 7/16" (11 mm) wrench (to attach earth ground lug)
- Label maker (to label cables, if needed)
- Voltmeter (for installing units with DC power supplies)
- A marker or masking tape to mark mounting holes
SBC 5000 Series Package Content
Before you install a new SBC 5000 series chassis, unpack and inspect your equipment and hardware to verify you have all the necessary items to install your SBC 5000 series chassis.
Accessory Kit
The following table provides the list of Bill of Materials (BOMs) provided with the SBC 5000 series Accessory Kit.
BOM Details
BOM Level | Item Number | Item Description | Item Rev | Qty |
|---|---|---|---|---|
1 | 300-30016 | LUG 2 HOLE ,#6 AWG WIRE, 45° ANGLE TONGUE, 1/4" STUD HOLE, 5/8" HOLE SPACING | 01 CCN-00190 | 1 |
1 | 301-31150 | 15PIN FEMALE D-SUB SOLDER STYLE | 02 CCO-01674 | 1 |
1 | 301-31151 | METAL HOOD FOR 2 ROW 15 PIN D-SUB | 02 CCO-01674 | 1 |
1 | 401-00119 | CABLE, 9 POS DSUB M-F NULL, MOULDED- 3M.-ROHS | 02 CCO-01525 | 1 |
1 | 401-00119 | NA | NA | 1 |
1 | 401-00119 | NA | NA | 1 |
1 | 401-00119 | NA | NA | 1 |
1 | 510-00038 | ESD WRIST STRAP | 01 CCO-510-00038 | 1 |
1 | 510-00038 | NA | NA | 1 |
1 | 510-00038 | NA | NA | 1 |
1 | 510-00056 | WASHER, 1/4 SPLIT LOCK STLS STL-ROHS | 1 | 2 |
1 | 510-00057 | WASHER, FLAT- 1/4 REG STLS STL-ROHS | 1 | 2 |
1 | 511-00046 | NUT, HEX 1/4-20 STL STEEL-ROHS | 01 ECO-00459 | 2 |
1 | 933-00450 | ASSEMBLY NOTES SBC5X00 ACCESSORY KIT | NA | NA |
Carefully remove the contents from the shipping container, and check each item for damage. The SBC 5000 series is shipped with the items listed below. If any item is missing or damaged, contact your representative for support.
Universal Rack Mount Kit
The following items are included in each Universal Rack Mount Kit:
| Item | Quantity |
|---|---|
| Chassis Rails | 2 |
| Rack Rail Guides | 2 |
| Chassis Rack Ears | 2 |
| 19" to 23" Rack Adaptors | 4 |
| Rack Mount Brackets | 4 |
| #8-32X1/4" Truss Head screws | 24 |
| #10-32X5/16" Flat Head screws | 4 |
| #10-32-5/8" Cup Head screws | 20 |
| #10-32 U-Nuts | 12 |
The following figure describes the Universal Rack Mount Kit contents.
Universal Rack Mount Kit
Overview
Content Tools