DO NOT SHARE THESE DOCS WITH CUSTOMERS!

This is an LA release that will only be provided to a select number of PLM-sanctioned customers (PDFs only). Contact PLM for details.

In this section:

 

The SBC Core supports the relaying TCP traffic (in addition to SIP/SDP traffic) with the use of a Relay Profile object and a Relay Port configuration on a per-Zone basis.

The Relay Port is used to establish end-to-end TCP relay connections between the TCP endpoints and the servers. the SBC terminates the connections initiated by the device and initiates connections towards the respective servers. TCP traffic policing and routing are performed based on the SBC local IP and port on which the connection is terminated. TCP packets are relayed with any content, for example, HTTP, XCAP, XMPP, or USS.

Refer to Zone - Relay Port - CLI for Relay Port configuration details.

 

Command Syntax

% set profiles services relayProfile <relayProfile name>
	maxEgressConn <value>
	maxEgressRate <# connections/second>
	maxIngressConn <value>
	maxIngressRate <# connections/second>
	tcp keepAlive <1-1000 seconds>

Command Parameters

The Relay Profile parameters are as shown:

Relay Profile Parameters

Parameter

Length/Range

Description

relayProfile

1-23 charactersThe name of the relay profile to assign to a relayPort.

maxEgressConn

>0The maximum number of simultaneous egress connections for this Relay Profile. (default = 1000)

maxEgressRate

>0The maximum rate, in seconds, at which egress connections are accepted. (default = 50)

maxIngressConn

>0The maximum number of simultaneous ingress connections for this Relay Profile. (default = 1000)

maxIngressRate

>0The maximum rate, in seconds, at which ingress connections are accepted. (default = 50)

tcp keepAlive

1-1000 secondsThe TCP keep-alive interval in seconds. (default = 200)

Command Examples

% set profiles services relayProfile MyRelayProfile maxEgressConn 1000 maxEgressRate 50 maxIngressConn 1000 maxIngressRate 50 tcp keepAlive 300

% show profiles services relayProfile MyRelayProfile
maxIngressRate 50;
maxIngressConn 1000;
maxEgressRate  50;
maxEgressConn  1000;
tcp {
    keepAlive 300;
}

  • No labels