DO NOT SHARE THESE DOCS WITH CUSTOMERS!

This is an LA release that will only be provided to a select number of PLM-sanctioned customers (PDFs only). Contact PLM for details.

In this section:




IMPORTANT

The SBC 51xx and SBC 52xx platforms are not supported from release 11.0.0 onwards. This release supports the SBC 5400, SBC 7000 and SBC SWe platforms.

Node-Locked Licensing 

For SBC functions and features to be fully available, a valid license must be obtained from Ribbon and installed in the system. Each SBC license provides a base set of capabilities to which additional features and capacity can be added and enabled as required. In node-locked licensing, an installed license file locks sessions and features to a specific SBC node which is identified through its hardware serial number or Virtual Machine Universal Unique Identifier (UUID).   

License files are referred to as license bundles. A license bundle contains a set of feature keys, each of which corresponds to a specific SBC feature or capability. The set of license keys enabled in your license bundle determine the features available on your system. A feature is enabled when its value is set to 1 (or another positive number in cases where licensed sessions are counted). A feature is disabled in a license when its corresponding license key is set to 0. Work with your Ribbon sales representative to determine your specific licensing requirements and to obtain your license bundle.

 Because a count of only "1" is required to enable the feature, the actual count is not used, just the fact that it is greater than 0.

On/Off license for the same feature in multiple bundles are not additive.

The count displayed selected is by:

  1. If one bundle expires later than the other ones, the count from that bundle is taken.
  2. If all the bundles expire at the same time, then one of the bundles is chosen.



SBC Base Licenses

The basic SBC Core 'starter package' for SIP/H.323 interworking functionality includes the base license keys SBC-RTU and SBC-SIP323, plus any add-on session licenses required for the necessary number of sessions.


SBC Base Licenses

Feature ID

Usage

SBC-RTU

Controls the right-to-use (RTU) for SIP and H.323 sessions. The following type of media sessions are enabled:

  • Pass-through audio (no DSPs)
  • Pass-through audio and video (no conferencing)
  • Transcoded audio (DSP modules required).

SBC-SIP323

SIP/H.323 Interworking function


SBC Feature Licenses

When other types of SBC functionality are required, additional license keys must be enabled in the license bundle. For example, SIP-I interworking requires enabling the SBC-SIP-I license key. The license bundle should therefore contain both the SBC-RTU and the SBC-SIP-I license keys. 

The currently available feature licenses and the platforms to which they apply are listed in the table below. 

SBC Feature Licenses

Feature ID

Usage

Platform

DSP-AMRNB

RTU media interworking using AMRNB. Use license to enable AMR-NB audio transcoding. (DSP modules required)

Note: Both DSP-AMRNB and VDSP-RTU licenses are required to transcode AMR-NB for SBC SWe.

SBC Core

DSP-AMRWB

RTU media interworking using AMRWB. Use license to enable AMR-WB audio transcoding. (DSP modules required)

SBC Core

DSP-EVRC

RTU media interworking using EVRC. Use license to enable EVRC audio transcoding. (DSP modules required)

Note: This license is not applicable to SBC SWe because EVRC is not supported.

SBC Core

DSP-EVSRTU media interworking using EVS. Use license to enable EVS transcoding. (DSP modules required)

SBC Core

DSP-G722 ($0 charge)

RTU media interworking using G.722. Use license to enable G.722 audio transcoding. (DSP modules required) 

Note: Ribbon does not charge for the G.722 codec; however, the SBC 5xx0/7000 series code still checks for this license. Because of this, a $0 charge DSP-G722 license must be generated and installed on SBC 5xx/7000 series in order to use G.722 features.

SBC Core

DSP-SILKRTU media interworking using SILK. Use license to enable SILK transcoding. (DSP modules required)

SBC Core

ENCRYPT

Encryption function for signaling using TLS, IPsec

SBC Core

LB-INSTANCE

MARKETPLACE-ROOT

MEDIA-PROBE

Enables the Media Probe feature to facilitate monitoring and management of voice quality by the SBC Core and Ribbon Analytics.

SBC Core
POL-BASE

SBC-1X10GMP

SBC 5400 RTU license to enable media port(s) operating at 10 Gbps. This will activate two 10 Gbps packet ports

SBC 5400

SBC-4X1GMP

SBC 5400 RTU license to enable all four media ports. each operating at 1 Gbps.

Note: If the SBC 5400 is configured for two 1 Gbps media ports (default configuration), no license is required).

SBC 5400

SBC-MRF-RTU

SBC-POL-E911

RTU license for E911 service.

SBC Core

SBC-POL-ENUM

SBC ERE support for accessing ENUM databases.

SBC Core

SBC-POL-RTU

SBC Advanced ERE RTU per session license.

Note: If both "SBC-POL-E911" and "SBC-POL-ENUM" licenses are installed, the "SBC-POL-RTU" license is not required.

SBC Core

SBC-LB

SBC-LIEnables support for Lawful Intercept service using ERESBC Core
SBC-P-DCS-LAESEnables lawful call interception when an appropriately formatted SIP P-DCS-LAES header is received.SBC Core
SBC-NICERECSession recording using the NICE proprietary recording system.SBC Core

SBC-SIPREC

SIPREC session recording support

SBC Core

SBC-SOSBC-RTU

SBC-VIDEO

Video interworking support, including Content Sharing (BFCP), Far-End Camera Control (FECC) and H.239 for H.323

SBC Core

SBC-SIP-I

SIP-I Interworking function

SBC Core

SRTP

Encryption function for Media using secure RTP

SBC Core

SBC-CAPACITY

Enables use of SBC features up to the capacity of the node. Actual license usage is reported to Ribbon using EMS statistics.

SBC Core
SBC-PSX-RTURequired to use an external PSX system.SBC Core

VDSP-RTU

Enables transcoding feature in SBC SWe. If value is non-zero, it allows specified number of transcoded calls on the system. If zero, no transcoded calls are allowed.

VDSP-RTU count should be always less than or equal to SBC-RTU count. If not, no transcoded calls are allowed.

Note: Any additional emergency oversubscription is not supported for transcoded emergency calls on SBC SWe.

SBC SWe

SWE-INSTANCERequired to run SBC SWe software.SBC SWe
SBC-MRF-RTU

Required to enable transcoding using an external Media Resource Function (MRF) device in a distributed SBC environment.

The SBC-MRF-RTU license is not a substitute for the SBC-RTU session license. Both the licenses are required to allow a session towards the MRF. The SBC-MRF-RTU license is only applicable to the S-SBC when deploying the distributed-SBC architecture.

SBC SWe
WEBSOCKET




License File Prerequisites

When it is generated, a license bundle file is bound to the host ID of the SBC to which it will be applied. For chassis-based systems (SBC 5xx0, 7000), the host ID is the serial number attached to the hardware. An SBC SWe system uses the Virtual Machine UUID as the host ID.

For a stand-alone SBC, the machine’s host ID must be contained in the license file to be valid. Likewise, for a SBC HA pair the host ID of both machines must be contained in the license file to be valid. License files can contain up to two SBC serial numbers (or UUIDs).

Serial Numbers (SBC 5xx0, 7000)

To obtain the serial number of either a stand-alone or a HA pair SBC, log into the SBC EMA and navigate to Monitoring > Dashboard > System Status. The System Status window appears. The serial number(s) display in the third column of the Server Status table as depicted in the examples below.

Server Status - Serial Number HA-Pair

Server Status - Serial Number Standalone


UUIDs (SBC SWe)

SBC SWe systems uses the Virtual Machine's Universal Unique Identifier (UUID) number instead of a serial number as shown in the example below.

Server Status - Serial Number SWe


Installing Licenses

 Once purchased, customers install and manage SBC licenses using the Embedded Management Application (EMA) user interface. Refer to License Management - Node Locked License Settings for the procedure to install a new license bundle.

License Expiry

Once a license is expired, the SBC treats the licensed functionality as disabled system wide. Any existing sessions that are active on expiry continue unimpaired. Traps are raised from the SBC to notify the user when a license is nearing expiration. For more information on Alarms, refer to the SBC Core Alarms Guide