DO NOT SHARE THESE DOCS WITH CUSTOMERS!

This is an LA release that will only be provided to a select number of PLM-sanctioned customers (PDFs only). Contact PLM for details.

In this section:

Use this object to specify use of domain names.

To View and Edit Domain Name

On SBC main screen, go to Configuration > System Provisioning > Category: Trunk Provisioning > IP Signaling Profile > Egress IP Attributes > Domain Name.

The Domain Name window is displayed.

On the Domain Name window, select the IP Signaling Profile from the drop-down list.

Trunk Provisioning - Egress Ip Attributes H323 Domian Name

 

The Edit Domain Name window is displayed.

Trunk Provisioning - Egress Ip Attributes SIP Domain Name

 

The following fields are displayed:

Egress Ip Attributes Domain Name Parameters

 

Parameter

DescrIPtion

Use SIP Domain Name In From FieldBy default, SBCuses its IP address as the host-port of the FROM URI in the outgoing INVITE message. Enable flag to use the originating gateway information returned in the policy response as the host-port of the FROM URI in the outgoing INVITE message.
  • Disable (default)
  • Enable

When Use SIP Domain Name In From Field is enabled, the following parameters are available:

    • Preserve Ingress From Domain Name – If a SIP domain is configured for the ingress trunk group and this flag is enabled, the default gateway associated with that SIP domain will be the originating gateway. Otherwise, the originating gateway will be the default gateway associated with the SIP domain associated with the Softswitch entity.
      • Disable (default)

      • Enable  

        Note

        This parameter only applies when a Domain Name is configured for this zone.

    • Use Lower Case Domain Names – Set flag to allow lower case domain name.
      • Disable (default)

      • Enable

        Note

        This parameter only applies when a Domain Name is configured for this zone.

Use SIP Domain Name In Request URI Use SIP Domain Name In Request URI Flag.
  • Disable (default)– SBC includes the IP address in the host-port portion of the Request-URI in outgoing SIP INVITE messages.
  • Enable – SBC includes the trunk group domain associated with egress trunk group as destination domain name in outgoing SIP INVITE messages.

When Use SIP Domain Name In Request URI is enabled, the following parameters are available:

    • Preserve Ingress RURI Domain Name – Preserve Ingress R-URI Domain Name Flag. When enabled, the ERE/SBCuses domain name received in the Request-URI as destination domain name in outgoing SIP INVITE messages. Normally, outgoing SIP INVITE messages contain the trunk group domain assigned to egress trunk group.
      • Disable (default)
      • Enable
    • Use Lower Case Domain Names – Set flag to allow lower case domain name.
      • Disable (default)
      • Enable
Use Zone Level Domain Name In Contact Enable flag to use Zone level domain name in Contact header.
  • Disable (default) 
  • Enable
Use IP Signaling Peer Domain In Request URI Enable flag to use IP Signaling Peer Domain in Request URI.
  • Disable (default)

  • Enable

Use SIP Domain in PAIHeader

Enable this flag to set the value of host port of the PAI URI equivalent to the value of the SIP domain name, which is configured on the ingress trunk group of the Policy Exchange Server (PSX). The options are:

  • Disable (default)
  • Enable

Make the required changes and click Save at the right hand bottom of the panel to save the changes made.

 

  • No labels