DO NOT SHARE THESE DOCS WITH CUSTOMERS!
This is an LA release that will only be provided to a select number of PLM-sanctioned customers (PDFs only). Contact PLM for details.
In this section:
The SIP DTMF Trigger Detection and Notification functionality enables the SBC Core to look for specific DTMF trigger patterns and to notify an external SIP entity when such patterns are detected. If a mid-call trigger is configured for a call, it is activated as soon as the call is connected. When the SBC Core detects DTMF input matching the pattern criteria of the trigger, it sends the DTMF input in a SIP INFO message to the SIP call peer with content type application/dtmf.
The values are:
On SBC main screen, go to Configuration > Profile Management > Category: Dtmf Trigger Profile > Dtmf Trigger.
The Dtmf Trigger window is displayed.
Profile Management - Dtmf Trigger
To edit any of the Dtmf Trigger in the list, click the radio button next to the specific Dtmf Trigger name.
Profile Management - Trigger Highlighted
The Edit Selected Dtmf Trigger window is displayed below.
Profile Management - Dtmf Trigger Edit Window
The following fields are displayed:
DTMF Trigger
Parameter | Description |
---|---|
| Specifies the DTMF name. |
| Specifies the administrative state of this dtmf trigger. |
| Indicates the pattern in digit-regular expression on which the SBC Core should match. Multiple patterns can be strung together using "." If you do not enter a pattern value, S# is assumed to be the default. |
| Specifies the interdigit timer (maximum time between digits) in milliseconds. If 0 is specified, the timer is disabled. Must be 0 to 65535. The default value is 4000. |
| Specifies the duration in milliseconds for a digit to be considered long. If 0 is specified, long digits are disabled. Must be 0 to 65525. The default value is 2000. |
Make the required changes and click Save at the right hand bottom of the panel to save the changes made.