Creating Custom Groups and Rules

Overview

The SBC includes several default groups (such as Administrator, Operator, Field Service, Guest, Calea and Security Auditor) that use various levels of access to CDB data, and to CLI and NETCONF commands. Group permissions are based on the defined AAA rules which are not user-editable. As a result, there is little flexibility to create user-defined groups with permissions for the pre-defined groups. Additionally, the users belonging to the custom group can only login to the CLI, but not the EMA.

Starting with Release 8.1, the SBC is enhanced to create user-defined groups with flexibility to modify the AAA rules. New functionality includes:

• Providing custom group users access to both the CLI and EMA.
• Flexibility to modify the AAA rules to the newly created custom group.

Configuration Example

To overcome adding one rule at a time for a new group, the CLI command aaarule-display-generatecli is added to display the applicable rules for an existing group and get an equivalent output in a file containing CLI commands. The user then edits this file to define the new set of rules and source the updated file in CLI to assign rules to the new custom group.

aaarule-display-generatecli

Command Syntax

To create new rules, refer to Local Authentication - CLI

Create the new rules for the custom group by executing the command:

 aaarule-display-generatecli -h
usage: [--help|-h] [--administrator|-a] [--operator|-o] [--fieldService|-f] [--guest|-g] [--calea|-c] [--securityAuditor|-s] [--group <new group name>] --display|-cli
        --help|-h: Help for usage
        --administrator|-a: Prints Administrator rules
        --operator|-o: Prints Operator rules
        --fieldService|-f: Prints Field Service rules
        --guest|-g: Prints Guest rules
        --calea|-c: Prints Calea rules
        --securityAuditor|-s: Prints Security Auditor rules
        --cli: CLI output for any of the specified groups. At least one group must be given in argument.
        --display: Display rules for any of the specified groups. At least one group must be given in argument.
        --group: New group name. The rules will be applied to this group. Else the name will be derived from default group

The options allow you to display and/or create CLI output files for one or more groups at a time. The user group name is required and/or display (--display) or a cli (--cli) option as mandatory parameters.

If the –cli option is given, the SBC stores the CLI output in the user home directory and can modify it.

 Assigning New Rules to Custom Group

To assign the new rules for the custom group, perform the following:

1. Use tool to view the rules for existing groups.
2. Create a group similar to the existing groups, and use the tool to fetch the rules of an existing group in the CLI file.
3. FTP the CLI file and update it with the new rules.
4. Update to change the privileges of the desired custom group.

5. Create a custom group by executing the command:

   set oam localAuth group <custom-group>
   

6. If the custom group name is not given as a command option, update the CLI file with the same group name as created in above step.

7. FTP the CLI file back to SBC in the same location.

8. Source the cli file by executing the command

   Source <cli file name>

Examples for Creating Custom Groups and Assigning the Rules

Creating New Custom group for Administrator

For example, to create an Administrator-like group without modify permissions for the data under the following:

• user

• rule-list

To create pseudo-administrator custom group, perform the following:

1. Create a cli file with the Administrator rules. A new file Administrator-cli.txt  is created.

   aaarule-display-generatecli--administrator --cli --group PseudoAdmin
   

2. Transfer the file from the SBC, using the SFTP  from the CLI user's home account.

3. Assign restrictions by executing the command:

   set oam localAuth rule-list DATA-PseudoAdmin-0 group PseudoAdmin rule 0 module-name * path /oam/localAuth/user context * access-operations create,update,delete,exec action deny
   set oam localAuth rule-list DATA-PseudoAdmin-1 group PseudoAdmin rule 1 module-name * path /oam/localAuth/rule-list context * access-operations create,update,delete,exec action deny
   set oam localAuth rule-list DATA-PseudoAdmin-2 group PseudoAdmin rule 2 module-name * path * context * access-operations read,create,update,delete,exec action permit
   commit
   
   set oam localAuth rule-list CMD-PseudoAdmin-0 group PseudoAdmin cmdrule 0 command "*" context cli access-operations read,exec action permit
   set oam localAuth rule-list CMD-PseudoAdmin-1 group PseudoAdmin cmdrule 1 command "*" context netconf access-operations read,exec action permit
   commit

4. Create a custom group by executing the command:
   

    

   set oam localAuth group PseudoAdmin

5. Transfer  the file using SFTP back to the SBC.

6. Source the file by executing the command:

   source Administrator-cli.txt 

   Note

   Creating a custom administrator group is allowed; however, it will have limited capabilities due to the restrictions in the code

   The following table highlights the differences in permissions between the Administrator and Customer Administrator.

   Administrator and Customer Administrator Differences

   Default Administrator	Custom Administrator
   Manage all the user ssh keys.	Can manage only its own ssh keys.
   Fetch sysdumps from the SBC.	Directory-level access similar to a non-administrator (cannot fetch the sysdumps.
   Change passwords without restrictions.	Cannot change passwords more than the configured value in system/admin/accountManagement/passwordAging/passwordMinimumAge days.

Creating New Custom group for Debugging

1. Create a new group similar to Guest group but with the permissions for only softReset and switchovers commands.
   The following will create a new CLI file Guest-cli.txt containing rules for Guest group.


   aaarule-display-generatecli --Guest --cli --group NewGuest

   
   

2. Transfer the file from the SBC, using the SFTP  from the CLI user's home account.

3. Update the rule list as follows:

   set oam localAuth rule-list DATA-Guest-13 group NewGuest rule 13 module-name * path /addressContext context * access-operations create,update,delete,exec action deny
   set oam localAuth rule-list DATA-Guest-14 group NewGuest rule 14 module-name * path /alarms context * access-operations create,update,delete,exec action deny
   set oam localAuth rule-list DATA-Guest-15 group NewGuest rule 15 module-name * path /global context * access-operations create,update,delete,exec action deny
   set oam localAuth rule-list DATA-Guest-16 group NewGuest rule 16 module-name * path /profiles context * access-operations create,update,delete,exec action deny
   set oam localAuth rule-list DATA-Guest-16_1 group NewGuest rule 16_1 module-name * path /system/admin/switchover context * access-operations create,update,delete,exec action permit
   set oam localAuth rule-list DATA-Guest-16_2 group NewGuest rule 16_2 module-name * path /system/admin/softReset context * access-operations create,update,delete,exec action permit
   set oam localAuth rule-list DATA-Guest-17 group NewGuest rule 17 module-name * path /system context * access-operations create,update,delete,exec action deny
   set oam localAuth rule-list DATA-Guest-18 group NewGuest rule 18 module-name * path /oam context * access-operations create,update,delete,exec action deny

   Here two new rules; 16_1 and 16_2 are added before rule 17, which enables the softReset and switchovers.
   
   

4. Create a custom group by executing the command:
    

   set oam localAuth group NewGuest 

   
   

5. Transfer the file using SFTP back to the SBC.

6. Source the cli file by executing the command

   Source Guest-cli.txt

Order of Rule Creation for Custom Group

The SBC matches rules in the order the rules are defined on the SBC. The SBC traverses the rule list until it finds a match. Once the SBC finds a match, it returns the result and ignores further rules in the list. Thus, if the order is not correctly defined, it is possible for a rule to be never found in a match.

 Redundant Rules

The following commands are two separate examples of the redundant commands. The SBC does not need specific permit rules when it has a generic rule to permit all the operations. The SBC does not need specific deny rules when it has generic rule to deny all operations.

Example 1:

set oam localAuth rule-list DATA-Guest-16_1 group NewGuest rule 16_1 module-name * path /system/admin/switchover context * access-operations create,update,delete,exec action permit
set oam localAuth rule-list DATA-Guest-16_2 group NewGuest rule 16_2 module-name * path /system/admin/softReset context * access-operations create,update,delete,exec action permit
set oam localAuth rule-list DATA-Guest-17 group NewGuest rule 17 module-name * path /system context * access-operations create,update,delete,exec action permit

 Example 2:

set oam localAuth rule-list DATA-Guest-16_1 group NewGuest rule 16_1 module-name * path /system/admin/switchover context * access-operations create,update,delete,exec action deny
set oam localAuth rule-list DATA-Guest-16_2 group NewGuest rule 16_2 module-name * path /system/admin/softReset context * access-operations create,update,delete,exec action deny
set oam localAuth rule-list DATA-Guest-17 group NewGuest rule 17 module-name * path /system context * access-operations create,update,delete,exec action deny

Difference between CLI and EMA paths

EMA uses different data paths compared to CLI in the CDB data model. Hence, while defining the rule, check the path and accordingly apply in the CLI or the EMA.

The following table lists the path differences between CLI and EMA.

For example,

Configuration Examples

Custom groups are used to associate a set of rules in a specific order to a set of users.

The steps to create and configure the custom group with the rules and granting permission include:

1. Viewing the existing group with the permissions
2. Using the existing group to Create Custom Group
3. Updating the Rules
4. Applying the permission
5. Sourcing the file

Viewing the existing group with the permissions

View the existing rules for the administrator by executing the command:

aaarule-display-generatecli --administrator --display 

The following output displays the existing rules for an Administrator group.

Group                Path                                                                             Permission                     Context              Action
=====                ====                                                                             ==========                     =======              ======
*                    /AAA/users/changePassword                                                        read exec                      *                    permit
*                    /oam/localAuth/users                                                             read create update delete exec cli                  deny
*                    /AAA/users                                                                       read create update delete exec netconf              deny
*                    /system/serverAdmin/hwType                                                       create update delete exec      *                    deny
*                    /oam/localAuth/users/changePassword                                              read exec                      *                    permit
*                    /oam/localAuth/userStatus/setRsaKey                                              read create update delete exec *                    permit
*                    /oam/localAuth/userStatus/deleteRsaKey                                           read create update delete exec *                    permit
*                    /oam/localAuth/userStatus/showRsaKey                                             read create update delete exec *                    permit
*                    /oam/aaa                                                                         read create update delete exec netconf              deny
*                    /oam/nacm                                                                        read create update delete exec netconf              deny
*                    /oam/localAuth/user                                                              create update delete exec      rest                 deny
*                    /oam/traps/admin/*                                                               read create update delete exec *                    permit
*                    /oam/traps/admin                                                                 create update delete           *                    deny
*                    /system/fileStatisticsAdmin/                                                     create delete                  *                    deny
*                    /profiles/dtmfTrigger/                                                           delete                         *                    deny
*                    /addressContext/intercept                                                        read create update delete exec *                    deny
Administrator        *                                                                                read create update delete exec *                    permit
*                    change-password                                                                  read exec                      *                    permit
*                    request alarms current comment alarmList                                         *                              cli                  deny
*                    request alarms current state alarmList                                           *                              cli                  deny
*                    request alarms clear alarmList                                                   *                              cli                  deny
Administrator        *                                                                                read exec                      cli                  permit
Administrator        *                                                                                read exec                      netconf              permit

Using the Existing Group to Create Custom Group

Create the new custom group from the existing group administrator by executing the command:

aaarule-display-generatecli --administrator --cli --group PseudoAdmin

This command creates the CLI file for a Pseudo-admin group. The rules are derived from an Administrator group and the command updates the rules and applies the permission.

Sourcing the Files

Source the file by executing the command:

admin@SBXUK23-1> source Administrator-cli.txt