DO NOT SHARE THESE DOCS WITH CUSTOMERS!

This is an LA release that will only be provided to a select number of PLM-sanctioned customers (PDFs only). Contact PLM for details.

In this Section:

 

Overview

Use the parameter callQueuing to configure the HPC call queuing at the global level.

Note

The use of the GETS SOFTWARE is restricted in the U.S. and U.S. TERRITORIES to NS/EP users authorized by the Office of the Manager, National Communications System (OMNCS).

Command Syntax

To configure callQueuing, use the following syntax:

set global callQueuing queueLength <1-4096>

Parameter Description

The descriptions of the parameters and flags are as follows:

callQueuing

ParameterLength/RangeDefaultDescriptionM/O
callQueuingN/AN/AUse this parameter to configure the HPC call queuing at the global level.O
queueLength1-40961024<1-4096> - Specifies the maximum number of HPC calls that the SBC can queue, combining all trunk groups.O

Command Example

To configure callQueuing, use the following example:

% set global callQueuing queueLength 2000

To display callQueuing, use the following example:

> show global callQueuing
    queueLength 2000;
  }
}