DO NOT SHARE THESE DOCS WITH CUSTOMERS!

This is an LA release that will only be provided to a select number of PLM-sanctioned customers (PDFs only). Contact PLM for details.

In this section:

 

Current Alarms displays details about the Alarms that are currently present in the triggered condition in the SBC. For further details on Alarms, refer to Dashboard - Alarms.

In the EMA, navigate to Monitoring > Dashboard > Alarms > Current Alarms.

The window Current Alarms appear, along with a frame containing the table Current Alarm List.

Current Alarms

 

The parameters (displayed as columns) in the table Current Alarm List are:

Parameters - Current Alarm List

ParameterDescription
SeverityAn indication for the extent of severity of the alarm.
StatusThe current status of the alarm
CommentsAny important comment about the alarm.
TimeThe time at which the alarm is triggered by the SBC.
DescriptionA brief description about the probable cause of the triggered alarm.
 

To edit a Current Alarm

To edit a Current Alarm, select it from the list displayed.

Select Current Alarm to edit

 

The frame Edit Alarm appears below the table(frame) Current Alarm List.

Edit Alarm

 

By default, the status of the alarm selected for editing is Active. To change the status to Acknowledged or Cleared, select the corresponding option against the field Status.

Make necessary changes for the fields Status and Comments. Click Save to save the changes made. Click Undo Edits to cancel all modifications since the last saved state.

The buttons Save and Undo Edits becomes active only after any changes are made in the Edit Alarm frame.

 

To enable live feed

To enable live feed of the alarms and different events triggering them, click the button Enable Live Feed in the table(frame) Current Alarm List. The live feed is displayed and the button changes to Disable Live Feed. To disable the live feed, click Disable Live Feed.

 

To clear current alarms shown in the page

To clear all the alarms shown in the table Current Alarm List, click the button Clear All Alarms Shown in the table(frame) Current Alarm List. A pop-up Clear Alarms Shown in Current Page appears, asking for the confirmation to proceed further. Click Yes to confirm. Click No to cancel clearing the alarms displayed in the current page.

Clear All Alarms Shown

 

To clear all current alarms in the system

To clear all the current alarms in the entire SBC, click the button Clear All Alarms in System in the table(frame) Current Alarm List.  A pop-up Clear All Alarms appears, asking for the confirmation to proceed further. Click Yes to confirm. Click No to cancel clearing the alarms.

Clear All Alarms in System

  • No labels