Use the Hard Disk Status window to view the status of the hard disk in the server.
Note
If the health test fails or life remaining threshold is reached, the drive may be faulty. Run diagnostics and replace the drive, if needed.
On the SBC main screen, go to Troubleshooting > Troubleshooting Tools > System Status and Usage > Hard Disk Status or
Monitoring > System > Category: Hardware Status > Hard Disk > Hard Disk Status or
All > System > Hard Disk Status
The Hard Disk Status window is displayed.
Hard Disk Status
The following output is displayed:
Hard Disk Status Parameters
Parameter | Description |
|---|---|
Server Name | Name of the server. |
Disk Number | Indicated the hard disk number (typically 0 through 3). |
Present | Indicates if the hard disk exists. |
Product ID | Indicates the product ID of the hard disk as assigned by the vendor. |
Revision | Revision of the hard disk as assigned by the vendor. |
Capacity | Indicates the capacity of the disk. |
Disk Status | Indicates if the disk is online/failed. |
Health Test | Specifies the overall health of the device |
Disk Life Remaining | Specifies a calculated percentage estimating the life remaining of the device or N/A if not supported by the device. |
Overview
Content Tools