In this section:

Related articles:

 


IMPORTANT

The SBC 5110 and SBC 5210 hardware platforms are no longer supported beginning with the 10.0.0R0 release. This release supports SBC 5400/7000/SWe platforms. Contact Ribbon Sales for upgrade information.


Warning

The SBC Core system is a closed network device. Customer modifications at the Linux level are not allowed or supported. These modifications can cause stability, update and fail-over issues.

Customers should only configure the SBC using the supported interfaces (Ribbon SBC Core CLI, REST API, EMA, or Ribbon EMS).

This section provides information on installing software on to the following Session Border Controller platforms: SBC 5400™ and SBC 7000™.

To install SBC Software Edition (SWe) software, refer to Installing SBC SWe in Virtual and Private Cloud Environments.

Pre-Installed Software for the Jumpstart System

The SBC Portfolio platforms are pre-installed with the latest version of the following platform software components:

  • Operating System
  • BMC Firmware—The Baseboard Management Controller (BMC) is a specialized micro-controller embedded in the SBC Portfolio platforms.
  • BIOS Firmware—The Basic Input/Output System.

The SBC application software package is available as a compressed tar file from the Ribbon Support Portal. Download the application software package to your local computer or server to install the application. Refer to Downloading Software from the Ribbon Support Portal.

For detailed information on installing the new application software, refer to Installing SBC Application.

Standalone vs. High Availability

The SBC platform can be configured for one of two different scenarios:

  • Standalone—A single SBC server.
  • High Availability (HA) / Redundant pair—A redundant SBC pair with one system protecting the other system in case of system failure. The HA configuration consists of two SBC servers configured for box-level redundancy.

SBC Operating Modes

When you initially configure SBC platform, Only Embedded Routing Engine (ERE) mode is supported for all SBC products from the 6.0.0 release. Refer to Routing and Policy Management to know more about the supported modes from the 6.0.0 release.

Embedded Routing Engine (ERE)– which is a light version of the PSX Policy Server for small to medium size networks with no complex routing. Select this mode if you are using an external PSX.

Return Merchandise Authorization (RMA) SBC

An ISO (re-imaging) should be performed on every SBC received through the RMA process. Perform ISO with the appropriate OS and application files. To know more about re-installing the OS, refer to:



  • No labels