In this section:

Specifies the details about the Message policer.

To View and Edit Message

On SBC main screen, go to Configuration > System Provisioning > Security Configuration > Sip Cac Profile > Message.

Select the desired Sip Cac Profile from the drop-down list to view its respective Message parameters.

The Message window is displayed.

Security Configuration - Sip Cac Profile - Message

 

The following fields are displayed:

Message Parameters

Parameter

Description

Ingress Aggregate Preference

Specifies the preference for MESSAGE within the ingress aggregate policer. The value range from 1 - 10. The default value is 1.

Ingress Burst Size

Specifies the maximum burst size for ingress MESSAGEs. The value range from 1 - 10000. The default value is 1.

Ingress Rate

Specifies the maximum ingress MESSAGE rate in aggregate messages per period. The value range from 1 - 1000 or unlimited.

Ingress Rate Period

Specifies the time period (in seconds) over which ingress MESSAGE rate applies. The value range from 1 - 10 seconds. The default value is 1 second.

Egress Aggregate Preference

Specifies the preference for MESSAGE within the egress aggregate policer. The value range from 1 - 10. The default value is 1.

Egress Burst Size

Specifies the maximum burst size for egress MESSAGE. The value range from 1 - 1000. The default value is 1.

Egress Rate

Specifies the maximum egress MESSAGE rate in aggregate messages per period. The value range from 1 - 1000 or unlimited.

Egress Rate Period

Specifies the time period (in seconds) over which egress MESSAGE rate applies. The value range from 1 - 10 seconds. The default value is 1 second.

Make the required changes and click Save at the right hand bottom of the panel to save the changes made.

 

  • No labels