In this section:


Relay Current Statistics

TCP relay statistics for current interval.

Command Syntax

> show table addressContext <addressContext_name> relayCurrentStatistics


Command Parameters

Relay Current Statistics Parameters

ParameterDescription
key 

This field is hard-coded to 'default' because no unique keys are generated for this particular statistic.

connTermGracefully 

The current number of TCP connections terminated gracefully.

connTermNonGracefully 

The current number of TCP connections terminated non-gracefully.

newConnCreated 

The current number of new TCP connections established successfully.


Relay Interval Statistics

TCP relay statistics for specific intervals.

Command Syntax

> show table addressContext <addressContext_name> relayIntervalStatistics


Command Parameters

Relay Interval Statistics Parameters

ParameterDescription
number 

The interval sequence number. The number of intervals to store are configurable. Refer to Interval Statistics - CLI for configuration details.

key 

This field is hard-coded to 'default' because no unique keys are generated for this particular statistic.

connTermGracefully The number of TCP connections terminated gracefully for the specified interval.
connTermNonGracefully The current number of TCP connections terminated non-gracefully for the specified interval.
intervalValid A setting of 'true' indicates the interval contains valid data during the time interval. Each interval is for a configurable fixed time (default interval is 15 minutes) starting on the hour. For example, if the system starts at 12:05, the first interval at 12:15 will not be valid because it is less than the 15-minute interval. Subsequent intervals will be valid upon meeting the 15-minute time interval. System switch-overs also cause invalid intervals because data is lost during the interval.
newConnCreated The current number of new TCP connections established successfully for the specified interval.
time 

System up-time when the interval statistic is collected.


Relay Session Statistics

TCP Relay session statistics.

Command Syntax

> show table addressContext <addressContext_name> relaySessionStats


Command Parameters

Relay Session Statistics Parameters

ParameterDescription
dataRxTx The Number of application data packets received and sent.
inboundLocalPeer SBC Ingress relay port IP address and port number.
inboundRemotePeer

The IP address and port number of peer from where TCP connection is received.

inboundZone Ingress Zone name.
outboundLocalPeer SBC Egress relay port IP address and port number.
outboundRemotePeer The IP address and port number of Peer where TCP connection is established from SBC.
outboundZone Egress Zone name.
packetRxTx The Number of TCP packets received and sent.

transId 

The index of the TCP relay port.

 


  • No labels