Ribbon provides replacement units to the Customer, and the Customer performs the installation for these replacement units. For CRU information and replacement instructions, refer SBC 7000 CRUs.
Equipment Requirement | Description |
---|---|
Fan Assembly | Four dual cooling fan assemblies located behind the front bezel. |
Solid State Drives | The 800GB or 960GB Solid State Disk (SSD) storage located behind the front bezel. Push the button beside disk to power down before removing the SSD drive. |
Air Filter | Located within the front bezel assembly, filters the cooling air. |
Front Bezel | Secures replaceable air filter to front of chassis and identifies LED status indicators. |
SFPs (Small Form-Factor) Plugs | Supports Single and Multi-mode Fiber SFPs and Copper SFPs (which functions like a plug) used for Gigabit Ethernet connections to Media ports and HA ports. The SFPs for media ports must be 10 Gigabit. Connect to LC-connector on the SFP side and SX-module on the other end of the connection to L3 switch. |
DSP Modules | The top 4 slots (1-4) of the rear panel are used for optional specialized hardware modules, the first released module being the DSP-LC high capacity transcoding resource module. |
CSC7000 (Core Server Card) | Located at slot 0 (above SCC slot) of the rear panel. It is used for used for Control and Data plane processing. |
SCC7000 (System Controller Card) | Located at SCC slot (bottom right) of the rear panel. It is used for chassis management and Processing (also known as BMC Baseboard Management Controller). |
Power Supply | Up to two DC or two AC power supply modules accessible from the rear of the chassis, and located on the bottom row next to SSC slot. NOTE: Changing the power supply module voltage type (AC to DC, or DC to AC) is not supported on the SBC 7000 platform. |
Refer to SBC 7000 Customer Replaceable Units for CRU component replacement details.
The ESD Susceptibility symbol Ribbon devices susceptible to electrostatic discharge. Do not handle equipment without wearing a properly grounded ESD wrist strap.
warns of the presence of