In this section:

Related articles:

The Number Globalization Profile object is used to define numbers that are to be globalized for egress SIP message headers. Specify a profile entry for each number type that needs to be globalized. The profile includes a digit type, a source for the country code, and a flag to enable the globalization. Assign Globalize Profiles to egress trunk groups by selecting them on the IP Signaling Profile for each trunk group.

Note

Prior to release 7.1, when the To-Header Transparency flag is set, the Request-URI is sent transparently even when the globalization flag of the Number Globalization Profile is enabled. In this case, the To-Header Transparency does not send the called number in the Request-URI locally.

Henceforth, the SBC supports globalizing the Request-URI by enabling globalization for the called number and enabling the To-Header Transparency flag. Thus, the Request-URI called number is not transmitted transparently to the egress leg (To-Header transparency flag will not affect Request-URI globalization). Note that Request-URI globalization is independent of the To-Header Transparency. This functionality applies to all scenarios where To-Header transparency is enabled, such as:

  • Redirection scenarios
  • Refer scenario
  • Interaction with Undo LNP
  • Modifying hostname of reqURI

To View Number Globalization Profile

On the SBC main screen, go to Configuration > System Provisioning > Category: Call Routing > Profiles > Number Globalization Profile. The Number Globalization Profile window is displayed.

Call Routing - Profiles - Number Globalization Profile

 

To Edit Number Globalization Profile

To edit any of the Number Globalization Profile in the list, click the radio button next to the specific Number Globalization Profile name.

Call Routing - Number Globalization Profile Highlighted

 

The Edit Selected Number Globalization Profile window is displayed below. You would not be able to edit any fields as they are read only.

To Create Number Globalization Profile

To create a new Number Globalization Profile, click New Number Globalization Profile tab on the Number Globalization Profile List panel.

Call Routing - Profiles - Number Globalization Profile Fields

The Create New Number Globalization Profile window is displayed.

Call Routing - Profiles - Number Globalization Profile Create Window

 

The following fields are displayed:

Number Globalization Profile Parameters

ParameterDescription
Name An identifier for globalize profile.
Entry 
Number

The type of number to be globalized.

Possible values are:

  • Calling Number
  • Called Number
  • Pretranslated
  • Redirection
  • Original Called Number
  • Location
  • Redirecting
  • Outpulse Number
  • Billing Number
  • gnDialed Digits
  • gnDestination
  • gnUserCallingScreened
  • gnUserCallingNotScreened
  • gnRedirectingTerminating
  • gnPortedDialed
  • gnCalledCESId
  • gnAdditionalCalled
  • gnAdditionalConnected
  • gnAdditionalCalling
  • gnAdditionalOriginalCalled
  • gnAdditionalRedirecting
  • gnAdditionalRedirection
  • 252
  • 253
  • 254
  • twoStageCollected
  • contractorNumber (Generic variant only)
  • gnNetworkProvidedNumber
  • PresentationNumber (Generic variant only)
  • fromURI
  • callDirectoryNumber
  • dialedNumber
  • gnThirdPartyNumber
  • gnCollectCallNumber
  • gnLocalANI
  • calledInNumber
  • none 
Digit Type

The digit type of the number to be globalized. They can be added individually or in multiples.

Possible values are: 

  • SubscriberType
  • NationalType
  • InternationalType
  • SubscriberOperator
  • NationalOperator
  • InternationalOperator
  • VerticalServiceCode
  • EasilyIdentifiableNumber
  • TollFree
  • 900PremiumToll
  • 950CarrierAccess
  • LocalOperator
  • LongDistanceOperator
  • Emergency
  • DirectoryAssistance
  • ServiceAccessCode
  •  IpVpn
  • Test Transit
  • OtherCarrierChosen
  • CarrierAccess
  • NoDigits
  • Private
  • GovernmentEmergency
  • UserName
  • Ieps
  • all
 

Country Source
Code

The source of the country code to be used in the globalized number.

Possible values are:

  • Destination
  • Ingress Trunk Group
  • Origination

Globalize

When selected, this number type is enabled for globalizing. When deselected, the number type is not globalized. The default is deselected. The options are:

  • enable
  • disable (default)

To Delete Number Globalization Profile

To delete any of the created Number Globalization Profile, click the radio button next to the specific Number Globalization Profile which you want to delete.

Call Routing - Number Globalization Profile Highlighted

 

Click Delete at the end of the highlighted row. A delete confirmation message appears seeking your decision.

Call Routing - Profiles - Number Globalization Profile Delete Confirmation

 

Click Yes to remove the specific Number Globalization Profile from the list.

  • No labels