In this section:
The Signaling Qos KPI Profile is associated with an IP Signaling Profile which in turn can be associated to an IP Peer or IP Signaling Peer Group or trunk group as a part of IP Signaling Profile.
To View Ip Signaling Peer Group
On SBC main screen, go to Configuration > System Provisioning > Category: Call Routing > Profiles > Ip Signaling Peer Group. The Ip Signaling Peer Group window is displayed.
Call Routing - Profiles - Ip Signaling Peer Group
To Edit Ip Signaling Peer Group
To edit any of the Ip Signaling Peer Group in the list, click the radio button next to the specific Ip Signaling Peer Group name.
Call Routing - Ip Signaling Peer Group Highlighted
The Edit Selected Ip Signaling Peer Group window is displayed below.
Call Routing - Profiles - Ip Signaling Peer Group Edit
Make the required changes and click Save at the right hand bottom of the panel to save the changes made.
To Create Ip Signaling Peer Group
To create a new Ip Signaling Peer Group, click New Ip Signaling Peer Group tab on the Ip Signaling Peer Group List panel.
Call Routing - Profiles - Ip Signaling Peer Group Fields
The Create New Ip Signaling Peer Group window is displayed.
Call Routing - Profiles - Ip Signaling Peer Group Create Window
The following fields are displayed:
IP Signaling Peer Group
Parameter | Description |
|---|---|
Name | Specifies the name of the IP Signaling Peer Group. |
Description | Specifies a short description of the IP Signaling Peer Group used. |
Send All Ip Address And FQDN | Specifies whether to send all the IP Addresses and the FQDNs using this IP Signaling Peer Group or not. The options are:
|
| IP Signaling Peer Group Data | |
Sequence | Specifies the sequence of this IP Signaling Peer Group. |
Service Status | Specifies the type of service for this IP Signaling Peer Group. Select inService to use this IP peer. The options are:
|
Ip Address | Specifies the IP Address of this IP Signaling Peer Group. |
Ip Port | Specifies the TCP/UDP port value of this IP Signaling Peer Group. |
Fqdn | Specifies the FQDN value to use for sending egress calls/requests to the IP peer. |
Fqdn Port | Specifies the FQDN port number to be used for sending egress calls/requests to the IP peer. |
To Delete Ip Signaling Peer Group
To delete any of the created Ip Signaling Peer Group, click the radio button next to the specific IP Signaling Peer Group which you want to delete.
Call Routing - Ip Signaling Peer Group Highlighted
Click Delete at the end of the highlighted row. A delete confirmation message appears seeking your decision.
Call Routing - Ip Signaling Peer Group Delete Confirmation
Click Yes to remove the specific Ip Signaling Peer Group from the list.
Overview
Content Tools