Use the Db Sync Check Profile window to configure the interval at which the SBC checks whether its configuration database and policy database are in sync. A database out-of-sync condition occurs when there is a mismatch between the databases in the count of trunk groups, IP Peers, relay ports, and so on. When an interval is defined and the SBC detects such a condition, it triggers an SNMP trap "sonusDatabaseConfigPolicyDataOutOfSyncNotification" to report the condition. 

 You can set the interval at which database synchronization is checked to a value between 5 and 30 minutes. Alternatively you can set the value to 0. When set to 0, the SBC still checks the databases every minute and logs any integrity errors in the .SYS file at /var/log/sonus/sbx/evlog, but trap notifications are not automatically triggered. 

DEFAULT is the only Db Sync Check profile you can configure, thus allowing a single, configured interval for the system.

Go to All > System > Profiles > Db Sync Check Profile  The Db Sync Check Profile window opens.

Db Sync Check Profile Window

 

To change the Sync Check Interval:

  1. Click the radio button adjacent to the name DEFAULT. The Edit Selected Db Sync Check Profile window opens.

    Edit Db Sync Check Profile Window

  2. In Sync Check Interval, enter an integer value between 5 (default) and 30 minutes to specify how often the databases are checked. A trap is triggered when they are out of sync. Or, enter 0 to set the interval to 1 minute, but do not sending a trap notification when the databases are out of sync.
  3. Click Save.