In this section:
Use the IP Signaling Peer Group object to configure an IP Signaling Peer Group containing a set of IP peers.
Command Syntax
% set profiles ipSignalingPeerGroup <peer_group_name> description <string> ipSignalingPeerGroupData <0-32000> sendAllIpAddressAndFQDN <disable | enable>
Command Parameters
The IP Signaling Peer Group Parameters are as shown below
IP Signaling Peer Group Parameters
Parameter | Length/Range | Description |
---|---|---|
| 1-23 | Name of IP Signaling Peer Group. |
| 1-199 | IP Signaling Peer Group description. |
| N/A | IP Signaling Peer Group configuration details. Assign a sequence number to each IP Peer to include in this IP Signaling Peer Group.
|
| N/A | By default, the PSX sends one IP address to the SBC in round robin order. Enable this flag to send all IP addresses and FQDNs for the IP Signaling Peer Group in a single policy response.
|
Command Example
% set profiles ipSignalingPeerGroup SIPPeer-1 description "Peer group example" ipSignalingPeerGroupData 1 fqdn www.mysite.com fqdnPort 5066 ipAddress 10.22.33.44 serviceStatus inService % set profiles ipSignalingPeerGroup SIPPeer-1 sendAllIpAddressAndFQDN enable % show profiles ipSignalingPeerGroup sendAllIpAddressAndFQDN enable; ipSignalingPeerGroup SIPPeer-1 { description "Peer group example"; ipSignalingPeerGroupData 1 { serviceStatus inService; ipAddress 10.22.33.44; fqdn www.mysite.com; fqdnPort 5066; } }
Overview
Content Tools