In this section:
Use this object to configure the management and packet Ethernet ports.
Command Syntax
Set Command Syntax
% set system ethernetPort mgmtAdmin <system_name> <mgt0 | mgt1> portIndex <index #> packetAdmin <system_name> <pkt0 | pkt1> portIndex <index #>
Request Command Syntax
% request system ethernetPort packetAdmin <host name> <pkt0 | pkt1> switchover
Command Parameters
Ethernet Port 'set' Parameters
Parameter | Description |
---|---|
| Use this object to configure management ports.
|
| Use this object to configure packet ports.
|
Ethernet Port 'request' Parameter Parameter Description Use this parameter to initiate a port switchover within a redundancy pair. Note: The
switchover
switchover
command only applies to pkt0 and pkt1 on the SBC 7000 and SBC SWe Cloud active server.
Command Example
This example displays Ethernet port configuration:
% show system ethernetPort packetAdmin merc pkt0 { portIndex 2; } packetAdmin merc pkt1 { portIndex 3; } packetAdmin merc pkt2 { portIndex 4; } packetAdmin merc pkt3 { portIndex 5; } mgmtAdmin merc mgt0 { portIndex 0; } mgmtAdmin merc mgt1 { portIndex 1; }
Overview
Content Tools