Modified: for 10.1.3

 


Note

The Platform Manager is not accessible through the EMA. 

Use this command to enable DoD mode, and to enable/disable CLI and/or EMA access for temporary troubleshooting and diagnostics.

Command Syntax

% set system admin <SYSTEM NAME> dod
	cliAccess <disabled | enabled>
	mode <disabled | enabled>
	pmAccess <disabled | enabled>

Command Parameters

Warning

Enabling CLI and/or EMA for DoD mode lowers the security posture of the SBC. Remember to disable CLI and PM access once you complete troubleshooting and/or diagnostics.

Parameter

Description

cliAccess

Use this flag to temporarily enable CLI for troubleshooting and diagnostic while the SBC is in DoD mode. 

  • disabled (default)
  • enabled

When enabled, this control opens up port 22.

mode

Use this flag to enable/disable DoD Mode. .

For more information about port usage, refer to SBC Core Ports Descriptions.

  • disabled (default)
  • enabled

When enabled, this control automatically blocks access to ports 22, 2024, 444, and 3091.

pmAccess

Use this flag to temporarily enable EMA's Platform Mode for troubleshooting and diagnostic while the SBC is in DoD mode. 

  • disabled (default)
  • enabled

When enabled, this control opens up port 444.