Configuring SBC for Net Number CRE

Routing based on OPTIONS pings

Use the following SMM to configure the SBC Core to interoperate with Net Number CRE and respond to OPTIONS pings locally at the SBC:

1. Create SMM Profile:

   set profiles signaling sipAdaptorProfile test state enabled
   set profiles signaling sipAdaptorProfile test advancedSMM disabled
   set profiles signaling sipAdaptorProfile test profileType messageManipulation
   set profiles signaling sipAdaptorProfile test rule 1 applyMatchHeader one
   set profiles signaling sipAdaptorProfile test rule 1 criterion 1 type message
   set profiles signaling sipAdaptorProfile test rule 1 criterion 1 message
   set profiles signaling sipAdaptorProfile test rule 1 criterion 1 message messageTypes request
   set profiles signaling sipAdaptorProfile test rule 1 criterion 1 message methodTypes options
   set profiles signaling sipAdaptorProfile test rule 1 criterion 2 type header
   set profiles signaling sipAdaptorProfile test rule 1 criterion 2 header
   set profiles signaling sipAdaptorProfile test rule 1 criterion 2 header name Request-Line
   set profiles signaling sipAdaptorProfile test rule 1 criterion 2 header condition exist
   set profiles signaling sipAdaptorProfile test rule 1 criterion 2 header hdrInstance all
   set profiles signaling sipAdaptorProfile test rule 1 criterion 3 type token
   set profiles signaling sipAdaptorProfile test rule 1 criterion 3 token
   set profiles signaling sipAdaptorProfile test rule 1 criterion 3 token condition regex-match
   set profiles signaling sipAdaptorProfile test rule 1 criterion 3 token tokenType uriusername
   set profiles signaling sipAdaptorProfile test rule 1 criterion 3 token regexp
   set profiles signaling sipAdaptorProfile test rule 1 criterion 3 token regexp string test.*
   set profiles signaling sipAdaptorProfile test rule 1 action 1 type token
   set profiles signaling sipAdaptorProfile test rule 1 action 1 operation delete
   set profiles signaling sipAdaptorProfile test rule 1 action 1 to
   set profiles signaling sipAdaptorProfile test rule 1 action 1 to type token
   set profiles signaling sipAdaptorProfile test rule 1 action 1 to tokenValue uriusername

2. Attach the following SMM to the ingress TG as inputAdaptorProfile.

   set addressContext default zone ZONE1 sipTrunkGroup TG1 signaling messageManipulation inputAdapterProfile test

Routing based on Trunk Context

Use the following SMM to configure the SBC Core to interoperate with Net Number CRE to populate the trunk context parameter at the SBC.

The CRE is configured to expect upper case letters for routing based on trunk context.

The figure below describes the routing based on trunk context.

Routing Based on Trunk Context