In this section:

This object creates and configures a call admission control (CAC) profile providing the ability for each SIP registered or static endpoint to have individualized limits on the number of active calls and the call rate.

A limit on active calls (CALL LIMIT) is applied to calls in either the ingress or egress direction, whereas policing controls (RATE, BURST-SIZE) apply to ingress and egress calls separately.

To View SIP CAC Profile

On the SBC main screen, go to Configuration > System Provisioning > Category: CAC Provisioning > Sip Cac Profile. The SIP CAC Profile window is displayed.

CAC Provisioning - Sip Cac Profile

 

To Edit SIP CAC Profile

To edit any of the SIP CAC Profiles in the list, click the radio button next to the specific SIP CAC Profile name.

CAC Provisioning - Sip Cac Profile Highlighted

 

The Edit Selected SIP CAC Profile window is displayed below.

CAC Provisioning - Sip Cac Profile \Edit window

Make the required changes and click Save at the right hand bottom of the panel to save the changes made.

To Create SIP CAC Profile

To create a new SIP CAC Profile, click New SIP CAC Profile tab on the SIP CAC Profile List panel.

CAC Provisioning - Sip Cac Profile Fields

The Create New SIP CAC Profile window is displayed.

CAC Provisioning - Sip Cac Profile Create Window

The following fields are displayed:

SIP CAC Profile Parameters

Parameter

Description

Name

Specifies the name of the SIP Call Admission Control (CAC) profile you are configuring. Must be 1-23 characters.

State

Specifies the administrative state of this SIP CAC Profile:

  • Disabled (default)
  • Enabled

NOTE: Setting a SIP CAC profile state to "Disabled" does not disable SIP CAC functionality on IP Peers to which the SIP CAC profile is assigned. To disable SIP CAC functionality on a specific IP Peer, disassociate the SIP CAC profile from the IP Peer.

Call Limit Threshold

Specifies the call limit utilization notification threshold limit. The value range from 0 to 100.

Call Ingress Rate

Specifies the maximum call arrival rate from a peer or registered endpoint per RATE- PERIOD. Must be 0-500 (calls) or unlimited; default is 0. A value of 0 indicates that call rate policing is not applicable.

Call Ingress Rate Period

Specifies the period in seconds over which the CALL INGRESS RATE applies. Must be 1-10 seconds; default is 1.

Call Ingress Brust Size

Specifies the maximum call burst size from a peer or registered endpoint. Must be 1- 500; default is 1.

Call Ingress Emergency Preference

Specifies whether to enable call emergency preference in the Ingress mode or not. The default value is disabled.

Call Ingress Aggregate Preference

Specifies the preference of calls within the aggregate policer in the Ingress mode.

Call Ingress Aggregate Emergency Preference

Specifies the emergency preferences of calls within the aggregate policer in the Ingress mode.

Call Egress Rate

Specifies the maximum call rate to a registered endpoint or peer per RATE-PERIOD. Must be 0-500 (calls) or unlimited; default is 0. A value of 0 indicates that call rate policing is not applicable.

Call Egress Rate Period

Specifies the period in seconds over which the CALL EGRESS RATE applies. Must be 1-10 seconds; default is 1.

Call Egress Brust Size

Specifies the maximum call burst size for calls to a registered endpoint or peer. Must be 1-500 (calls); default is 1.

Call Egress Emergency Preference

Specifies whether to enable call emergency preference in the Egress mode or not. The default value is disabled.

Call Egress Aggregate Preference

Specifies the preference of calls within the aggregate policer in the Egress mode.

Call Egress Aggregate Emergency Preference

Specifies the emergency preferences of calls within the aggregate policer in the Egress mode.

Call Limit

Specifies the maximum number of active calls to and from any registered endpoint or peer (the total number of ingress and egress calls). Default is unlimited.

Bandwidth Limit

Specifies the maximum bandwidth a peer can use in kbps. The value range from 0 to 2147483647 k bits/second or unlimited.

Bandwidth Limit Threshold

Specifies the bandwidth limit value in percentage. The value range from 0 to 100.

Bandwidth Video  Threshold

Specifies the threshold value (as a percentage of video bandwidth) to limit video streams to a specific bandwidth to prevent video calls consuming call bandwidth otherwise needed for audio calls. The value range from 0 to 100 and the default value is "0" which indicates no video threshold value.

Emergency Oversubscription

Oversubscription of calls (as a percentage) allowed for emergency calls. Enter value in range of 0-1000. Oversubscription of calls (as a percentage) allowed for emergency calls. When the baseline limit is reached, normal calls will be stopped but emergency calls will be allowed up to this additional percentage.

Extended Emergency Ip LimitAdditional number of emergency calls (expressed as a numeric value) allowed if call limit and emergency oversubscription quota are exhausted. The value ranges from 0 to 40000 and the default value is 0.

Call Limit Ingress

Specifies the maximum number of inbound active calls. The value range from 0 to 30000 or unlimited.

Emergency Oversubscription Ingress

Specifies the oversubscription of calls (as percentage) allowed for inbound emergency calls. Once the baseline limit is reached, normal calls are blocked but emergency calls are allowed. The value range from 0 to 1000.

Extended Emergency Ip Limit IngressAdditional number of emergency calls (expressed as a numeric value) allowed for ingress CAC group if call limit and emergency oversubscription quota are exhausted. The value ranges from 0 to 40000 and the default value is 0.

Call Limit Egress

Specifies the maximum number of outbound active calls. The value range from 0 to 30000 or unlimited.

Emergency Oversubscription Egress

Specifies the oversubscription of calls (as percentage) allowed for emergency calls. The value range from 0 to 1000.

Extended Emergency Ip Limit EgressAdditional number of emergency calls (expressed as a numeric value) allowed for egress CAC group if call limit and emergency oversubscription quota are exhausted. The value ranges from 0 to 40000 and the default value is 0.

To Copy SIP CAC Profile

To copy any of the created SIP CAC Profile and to make any minor changes, click the radio button next to the specific SIP CAC Profile to highlight the row.

CAC Provisioning - Sip Cac Profile Highlighted


 

Click Copy SIP CAC Profile tab on the SIP CAC Profile List panel.

CAC Provisioning - Sip Cac Profile Fields

The Copy Selected SIP CAC Profile window is displayed along with the field details which can be edited.

CAC Provisioning - Sip Cac Profile Copy Window

Make the required changes to the required fields and click Save to save the changes. The copied SIP CAC Profile is displayed at the bottom of the original SIP CAC Profile in the SIP CAC Profile List panel.

To Delete SIP CAC Profile

To delete a SIP CAC Profile, click the radio button next to the specific SIP CAC Profile which you want to delete.

CAC Provisioning - Sip Cac Profile Highlighted

Click Delete at the end of the highlighted row. A delete confirmation message appears seeking your decision.

CAC Provisioning - Sip Cac Profile Delete Confirmation

Click Yes to remove the specific SIP CAC Profile from the list.

 

  • No labels