This object displays the call CDR configuration. Records are always written to the local disk. On the SBC main screen, go to Administration > Accounting and Logs > Admin. The CDR Admin window is displayed. Accounting and Logs - Edit Cdr Admin Window The fields displayed are: Edit Cdr Admin Window Parameter Description The SBC version on which the CDRs must remain formatted even after the SBC software is upgraded. The valid values for the configuration option are 0 or 10.1 for the SBC 10.1 release. The default value for the configuration is 0 (disabled). If the option is disabled, the CDRs are formatted according to the CAM version of the software release loaded on the SBC. Note: The valid values list will change over time to support future releases. Examples of how the configuration control works, if the users do not want to update the billing systems with every SBC upgrade: Upgrade from SBC 8.2 (or any old release) to 10.1 Upgrade from SBC 8.2 ( or any old release) to 11.1 (or future releases later than 10.1) If the configuration is set to the currently-loaded SBC software version (provided the current SBC loaded version is greater than or equal to 10.1) the CDR formatting is retained according to the selected SBC version across the upgrades. Upgrade from SBC 10.1 to 11.1 (or future release later than 10.1) Set the new configuration to 10.1 from 0 (disabled) prior to the upgrade. Fresh installation of the SBC (version greater than or equal to 10.1 ) Example: you are planning to add more SBCs to a cluster already using the current feature (the SBC version is 11.1 and the CDRs are formatted to 10.1 by having the new config set to 10.1 on the SBCs). Enables or disables generation of CDRs for recording SIP calls. Generation Mode The type of calls for which accounting records should be logged on this SBC Core system: Intermediate Acct State Specifies whether Intermediate Accounting is Enabled or Disabled for the Node. Intermediate Acct Interval This configures the intermediate accounting interval in seconds. Note: This object is only applicable when "sonusAcctIntAcctMode" is set to interval(1). Second Stage Inherit First Stage Enable flag to allow second stage accounting records for two stage calls to inherit fields from the first stage call. Populate Non-ported LNP Numbers Enable flag to populate the Called Number Before Translation field in the accounting record for a number for which an LNP lookup was performed and lookup indicated that number has not been ported. Intermediate Acct Mode Specifies the method by which intermediate records are generated. Intermediate Long Dur Gen Time Specifies Octet string that identifies the GMT time to generate Telcordia Long Duration accounting records. The format is 00:00:00.0 where each field is: Start Acct State Specifies whether Start Accounting is Enabled or Disabled for the Node. Enable flag to generate EVENT records for OOD SUBSCRIBE, REFER, NOTIFY, REGISTER, OPTIONS, MESSAGE and PUBLISH event records. CDRs are logged when OPTIONS is relayed to the egress side. Log event records containing PSX information, such as PSX Congestion level, PSX Processing Time, Policy Response Call Type, PSX Billing Info, Route Label. Intermediate Trap State Specifies whether a trap will be generated whenever an INTERMEDIATE record is generated. Populate Remote GSX Info State Specifies whether a destination SBC 5000 series propagates its billing data to originating GSX for GW-GW calls. Early Attempt State Specifies whether or not to generate early ATTEMPT records. An early ATTEMPT record is associated with an early call disconnect, before the request is sent. Intermediate Long Dur Threshold Specifies the Accounting INTERMEDIATE Records Duration (in hours). Must be 1-24; default is 24. This parameter is only applicable when intermediate records mode is set to Telcordia. The INTERMEDIATE record is generated for each call whose duration exceeds this threshold on long duration generation time. Send Egress CDR Info on Receipt Specifies whether or not to send the egress CDR information immediately after receiving and processing it. Populate IP TG Far End Switch Type Specifies whether or not to use Ingress Far End Switch Type passed down from PSX IP TG for SIP ingress calls. Patch Ver Specifies a CAM patch version to roll the accounting file and print version-specific fields. Range: 0-255 / Default: 0 Max Record Sequence Num Specifies the maximum length of the Record Sequence Number field in the CDR.
cdrVerToGenerate Upgrade Scenario Action and/or Effect The new control does not take effect. Generate SIP Recording CDR
For SIP and H323 calls, accounting records are generated for all calls (ingress and egress), unless this value is none.
field octets contents range
----- ------- ------------ -----
1 1 hour 0..23
2 2 minutes 0..59
3 3 seconds 0..60 (use 60 for leap-second)
4 4 deci-seconds 0..9
Event Acct State Event Acct PSX Info State
Additional topics:
Overview
Content Tools