In this section:
The X-Header profile controls mapping of X-Headers to ISUP parameters in a specific environment. The X-headers are customer proprietary and are intended for their use only.
A default X-header profile is available in SBC 5000 series, which has the values pre-seeded for all mandatory parameters. You cannot delete or modify this profile. However, you can create additional X-Header profiles change values, as required.
On the SBC main screen, go to Configuration > Profile Management > Category: Signaling Profiles > XHeader Profile.
The XHeader Profile window is displayed.
To edit any of the XHeader Profile in the list, click the radio button next to the specific XHeader Profile name.
The Edit Selected XHeader Profile window is displayed below.
You would not be able to make any changes as the filed are read-only.
To create a new XHeader Profile, click New XHeader Profile tab on the XHeader Profile List panel.
The Create New XHeader Profile window is displayed.
The following fields are displayed:
To copy any of the created XHeader Profile and to make any minor changes, click the radio button next to the specific XHeader Profile to highlight the row.
Click Copy XHeader Profile tab on the XHeader Profile List panel.
The Copy Selected XHeader Profile window is displayed along with the field details which can be edited.
The following fields are displayed:
Make the required changes to the required fields and click Save to save the changes. The copied XHeader Profile is displayed at the bottom of the original XHeader Profile in the XHeader Profile List panel.
To delete any of the created XHeader Profile, click the radio button next to the specific XHeader Profile which you want to delete.
Click Delete at the end of the highlighted row. A delete confirmation message appears seeking your decision.
Click OK to remove the specific XHeader Profile from the list.