This page describes CLI syntax and parameters for the SIP Trunk Group 'congestionHandling' object.
Use this object to specify the parameters governing the behavior when under local overload or when receiving congestion indications from downstream peers.
% set addressContext <name> zone <name> sipTrunkGroup <name> congestionHandling egressThrottling <disabled | enabled> retryAfterMax <0-120> retryAfterMin <0-120>
SIP Trunk Group Congestion Handling Parameters
Parameter | Length/Range | Description |
---|---|---|
egressThrottling | N/A | Determines whether received peer overload indications (SIP 503 w/ Retry After) cause to adaptively throttle egress calls and registrations to that peer. Options are:
|
retryAfterMax | 0-120 | <value> (default = 30) – Maximum Retry-After time (in seconds) when an ingress call or register is rejected with 503 due to local overload. |
retryAfterMin | 0-120 | <value> (default = 10) – Minimum Retry-After time (in seconds) when an ingress call or register is rejected with 503 due to local overload. |