Use the Radius Server window to configure parameters for RADIUS servers to which you want to send call-accounting records derived from CDR data.
To View RADIUS Servers
On the SBC main screen, go to All > OAM > Accounting > Radius > Radius Server.
The Radius Server window is displayed.
To Create a RADIUS Server
To create a new RADIUS server configuration:
Click New Radius Server. The Create New Radius Server window opens.
Create New Radius Server Window
- Use the following table to edit the parameters and then click Save.
Parameter | Description |
---|
Server Name | Name for the RADIUS server. |
Priority | The priority for this server. The range allowed is 1 to 8 with the lowest number having the highest priority. |
State | The administrative state of the RADIUS server configuration. - Enabled
- Disabled (default)
|
Server Address | Specifies the address of the server as either a hostname, an IPv4 address in dot notation, or an IPv6 address in hex-colon notation. |
Server Port | IP port used to send requests to the RADIUS server. |
Shared Secret | Specifies the shared secret key between the RADIUS server and the SBC. The value ranges from 8 - 128 characters and the default value is 123456789abcdef0 . Note: The shared secret must be the same as what is set on the external RADIUS server. |
Cleanup Delay | The time for which the RADIUS server maintains the received requests after they are acknowledged, so that retries sent to the server can be detected. |
To Copy a RADIUS Server
To copy a RADIUS server configuration:
- Click the radio button next to the specific RADIUS server.
- Click Copy Radius Server. The Copy Selected RADIUS Server window opens.
- Make any needed changes and click Save.
To Delete a RADIUS Server
To delete a RADIUS Server configuration:
- Click the radio button next to the specific RADIUS Server that you want to delete.
- Click the delete icon (X) at the end of the row.
- Confirm the deletion when prompted.