Resources | profiles | signaling | signalingProfile | egress | egressFlags
 egressFlagsSpecifies various egress trunk group controls. |
Configuration
| Parameter | Presence | Type | Default | Description | |
|---|---|---|---|---|---|
 | addPrefix011ForInternationalCalls | O | enumeration | disable | When this check box is selected, allows the addition of the prefix 011 for international calls. |
| addPrefix1ForInterLataCalls | O | enumeration | disable | When this check box is selected, allows the addition of the prefix "1" for Inter LATA calls. |
| addPrefix1ForIntraLataCalls | O | enumeration | disable | When this check box is selected, allows the addition of the prefix "1" for Intra LATA calls. |
| annexESupport | O | enumeration | disable | Annex E is supported |
| applySwitchTypeCpcProfile | O | enumeration | disable | When this check box is selected, enables the CPC/OLI Parameter Mapping feature on the associated trunk group(s). |
| callBackWhenFreeSupport | O | enumeration | disable | When this check box is selected, enables the Call Back When Free feature on the associated trunk group(s). The PSX includes the Call Back When Free attribute in the route structure when the trunk group is included in the route list. |
| calledNumber7Digits | O | enumeration | disable | When this check box is selected, the 7-digit called number is sent as part of the outgoing signaling protocol. |
| callingNumber7Digits | O | enumeration | disable | When this check box is selected, the 7-digit calling number is sent as part of the outgoing signaling protocol. |
| changeBearerCapFrom3_1KHzToSpeech | O | enumeration | disable | When the check box is selected, the bearer capability of 3.1 kHz received from the ingress is reset to speech for this outgoing trunk group. |
| convertNumbersToE164Format | O | enumeration | disable | When this check box is selected, numbers are converted to E.164 format. |
| cpcMapping | O | enumeration | disable | When this check box is selected, enables CPC mapping on the associated trunk group(s). |
| dialedNumberAsCalledNumber | O | enumeration | disable | When this check box is selected, the PSX populates the called number (associated with a returned route) with the dialed number. |
| disableChargingAuthorityForChosenCarrier | O | enumeration | disable | When this check box is selected, the GSX does not delete the ISUP parameters from the ACM and CPG messages, and it allows the CHG message to transit when it is acting as the chosen carrier. |
| discardCallingAndContractNumbers | O | enumeration | disable | When this check box is selected, the GSX will not include the calling and contractor numbers in egress signaling when the calling number NOA is Network Specific and the first digit of the calling number is not 0, or the calling number screening is set to User Provided, Verified, and Failed. |
| discardGAPAddlClgIfSameAsClgNumberAndIngressSIP | O | enumeration | disable | When this check box is selected, for SIP-to-ISUP calls, the GSX does not include the GAP additional calling number in the egress signaling if it is the same as the original calling number. |
| discardTnsAndTrunkgroupOwningCarrierMatch | O | enumeration | disable | When this check box is selected, causes the TNS parameter to be discarded when it matches the Owning Carrier assigned to the egress trunk group. |
| dontStripClgNumberForRestrictedPresentation | O | enumeration | disable | When this check box is selected, the PSX does not strip (delete) the digits of the calling number for restricted presentation. |
| forcedOverrideOlipValue | O | enumeration | disable | When this check box is selected, and there is a value other than none in the Forced OLIP Value field in the ingress section of the trunk group to which this signaling profile is applied, the value in that field is copied to the OLI parameter on the egress trunk and sent in the PSX policy response. |
| generateFeParam | O | enumeration | disable | When this check box is selected, controls the generation of the FE parameter. |
| oliMapping | O | enumeration | disable | When this check box is selected, enables OLI Parameter mapping on the associated trunk group(s). |
| overwriteChargeInformationIfChosenIXC | O | enumeration | disable | When this check box is selected, the GSX will modify parameters related to charge indication if the value of the Carrier Type parameter determined by the PSX is Chosen IXC. |
| performCalledPartyMemberCheck | O | enumeration | disable | When this check box is selected, the PSX checks the called party member status in the subscriber table for the JTI prefix. |
| propagateChargeMessage | O | enumeration | disable | When this check box is selected, the PSX propagates the CRG messages received on the associated egress trunk group from succeeding exchanges to the originating exchange for billing purposes. |
| propagateGdParam | O | enumeration | disable | Controls the propagation of the Generic Digits parameter (switch ID/trunk group ID) in the forward direction in the egress IAM. |
| propagateIngressChannelInfo | O | enumeration | disable | When this check box is selected, propagate ingress PSTN channel information in the INVITE header sent by a GSX to this SIP Server (via the "chan" parameter in the From: field). |
| reorderTrunkBasedOnIsupPreference | O | enumeration | disable | When this check box is selected, the PSX orders route lists appropriately for calls over ISUP trunks that terminate to a protocol converter for R2 signaling. |
| replacePrefix0WithPlus81ForTranslationSourceNumber | O | enumeration | disable | When this check box is selected and the Translation Source Number has the prefix 0, PSX replaces the prefix 0 with +81. GSX uses this number for SIP signaling. The Translation Source Number without the +81 is recorded in the CDRs. |
| rerouteOnSignalingCongestion | O | enumeration | disable | When this check box is selected, calls on the associated trunk group are rerouted to an alternate route. |
| resetOlipForTollFreeCalls | O | enumeration | enable | When this check box is selected, the GSX resets the OLIP for toll free calls to the pay phone code. |
| restoreCallingNumberIfDerivedFromBillingNumber | O | enumeration | disable | When this check box is selected, the calling number that came in the policy request is sent in the policy response. |
| restoreCallingNumberIfDerivedFromRedirectingNumber | O | enumeration | disable | When this check box is selected, and if the PSX derives the calling number from the redirecting number during call processing, the PSX restores the original calling number before sending it in the policy response. |
| restoreCallingNumberIfDerivedFromTrunkGrp | O | enumeration | disable | When this check box is selected, and if the PSX derives the calling number from the default calling number associated with the ingress trunk group during call processing, the original calling number is restored before the call is sent out on the egress trunk group. |
| restoreFciInternationalBit | O | enumeration | disable | When this check box is selected, the PSX copies the incoming FCI A-bit to the outgoing FCI A-bit. |
| sendBillingNumberAsClgNumber | O | enumeration | disable | When this check box is selected, the PSX populates the contents of the billing number over to the calling party parameter. |
| sendBillingNumberAsClgNumberIfClgNumberNotPresent | O | enumeration | disable | When this check box is selected, and if the calling number doesn't exist or the calling number presentation is set to Restricted, the PSX populates the calling number field in the policy response with the billing number. |
| sendCallingNumberWhenNotDerivedFromInput | O | enumeration | disable | When this check box is selected, and if the calling number doesn't exist or the calling number presentation is set to Restricted, the PSX populates the calling number field in the policy response with the billing number. |
| sendContractNumberIfAllowedByIngressSip | O | enumeration | disable | When this check box is selected and the ingress signaling is SIP, the Contractor Number, if it exists, will be sent in the egress signaling. |
| sendTollFreeNumberInGapParam | O | enumeration | disable | When this check box is selected, the toll free number will be sent in the Generic Address Parameter (GAP). |
| sendTollFreeNumberInOcnParam | O | enumeration | enable | When this check box is selected, the toll free number will be sent in the Original Called Number (OCN) parameter. |
| stripRepAreaCodeDigits | O | enumeration | enable | When this check box is selected, RAC digits are removed from the called party number. |
| transitAllRedirectionNumberNOA | O | enumeration | disable | When this check box is selected, the PSX informs the GSX to forward the R-REL transparently to the previous switch regardless of the Nature Of Addresss. |
| undoLnp | O | enumeration | disable | When this check box is selected, GSX undoes LNP on the associated trunk group(s). |
| useOutputANIForCDNIS | O | enumeration | disable | When this check box is selected, the Automatic Number Identification (ANI) to be included in the egress signaling will be used for the ANI provisioned in the Custom DNIS DM rule on the associated egress trunk group. |
| REST API: GET Example |
|---|
curl -kisu 'admin:secret' -X GET https://{SBX-SERVER}/api/config/profiles/signaling/signalingProfile/{name}/egress/egressFlags |
Overview
Content Tools