Use the following procedure to configure the SBC Edge for EdgeView at the node-level.
Click Login. The main screen provides all Web UI functions, including tabbed options, menu tree, device name, and the last login date and time of the system.
Select Settings > System > Node-Level Settings.
SBC 1000/2000 EdgeView in Node-Level Settings Screen - Enabled
When you enter the EdgeView Management ID, you must insert a colon every two characters (00:00:00). Otherwise, the SBC SWe Lite cannot connect to the EdgeView.
SBC SWe Lite EdgeView in Node-Level Settings Screen - Enabled
Use the following table to configure the EdgeView panel.
Parameter | Description |
---|---|
EdgeView | Configure this field to enable or disable the EdgeView SCC.
|
EdgeView Address | Configure this field with the IP address or FQDN of the EdgeView. Note: This field applies only when the EdgeView field is set to Yes. |
EdgeView Management ID | Caution: When you enter the EdgeView Management ID, you must insert a colon every two characters (00:00:00). Otherwise, the SBC SWe Lite cannot connect to the EdgeView. Configure this field with the Management ID for the EdgeView. Note: This field applies only to the SBC SWe Lite. The SBC 1000/SBC 2000 automatically sends the MAC address to the EdgeView. Note: This field applies only when the EdgeView field is set to Yes. |
EdgeView Connection | The status of the SBC Edge device's connection to the EdgeView. This status may be one of the following:
Note: This field applies only when the EdgeView field is set to Yes. |
EdgeView Tunnel Status | The status of the HTTPS tunnel from the EdgeView to the SBC Edge device. This status may be one of the following:
Note: This field applies only when the EdgeView field is set to Yes. |
EdgeView C2E License | The status of the EdgeView Cloud to Edge Licensing on the SBC Edge device. This status may be one of the following:
Note: This field applies only to the SBC SWe Lite. Note: This field applies only when the EdgeView field is set to Yes. |