Use the following procedure to configure the SBC Edge for EdgeView at the node-level.

  1. Access a compatible web browser.
  2. In the browser, enter the IP address of the SBC Edge in the URL address bar. The Welcome to Ribbon screen is displayed.
  3. Review the Pre-Login message.
  4. Enter the administrator User Name and Password configured during initial setup.
  5. If the Acknowledge Pre-Login Message checkbox is displayed, click on it to acknowledge you have reviewed the pre-login information above. After initial login, you can enable and disable this checkbox via the Global Security Options. By default, this checkbox is configured as disabled.

  6. Click Login. The main screen provides all Web UI functions, including tabbed options, menu tree, device name, and the last login date and time of the system.

  7. Select Settings > System > Node-Level Settings.

    SBC 1000/2000 EdgeView in Node-Level Settings Screen - Enabled

    Caution

    When you enter the EdgeView Management ID, you must insert a colon every two characters (00:00:00). Otherwise, the SBC SWe Lite cannot connect to the EdgeView.

    SBC SWe Lite EdgeView in Node-Level Settings Screen - Enabled

  8. Use the following table to configure the EdgeView panel.

    ParameterDescription

    EdgeView

    Configure this field to enable or disable the EdgeView SCC.

    • No (default) - The EdgeView is disabled.
    • Yes - The EdgeView is enabled.

    EdgeView Address

    Configure this field with the IP address or FQDN of the EdgeView.

    Note: This field applies only when the EdgeView field is set to Yes.

    EdgeView Management ID

    Caution: When you enter the EdgeView Management ID, you must insert a colon every two characters (00:00:00). Otherwise, the SBC SWe Lite cannot connect to the EdgeView.

    Configure this field with the Management ID for the EdgeView.

    Note: This field applies only to the SBC SWe Lite. The SBC 1000/SBC 2000 automatically sends the MAC address to the EdgeView.

    Note: This field applies only when the EdgeView field is set to Yes.

    EdgeView Connection

    The status of the SBC Edge device's connection to the EdgeView. This status may be one of the following:

    • Down
    • Up

    Note: This field applies only when the EdgeView field is set to Yes.

    EdgeView Tunnel Status

    The status of the HTTPS tunnel from the EdgeView to the SBC Edge device. This status may be one of the following:

    • Down
    • Up

    Note: This field applies only when the EdgeView field is set to Yes.

    EdgeView C2E License

    The status of the EdgeView Cloud to Edge Licensing on the SBC Edge device. This status may be one of the following:

    • False
    • True

    Note: This field applies only to the SBC SWe Lite.

    Note: This field applies only when the EdgeView field is set to Yes.

  9. Click Apply.