The LAN interface ports are pre-configured with the IP address 192.168.1.1.
- Connect a computer to the LAN interface port (Port 1) using an Ethernet cable or connect to an Ethernet switch (using the IP address 192.168.1.2 and subnet mask 255.255.255.0).
- Launch a web browser on your computer and enter the following URL: http://192.168.1.1.
Press Return. The EdgeMarc login screen is displayed.
EdgeMarc Login Screen
- Enter your initial username in the field provided: root.
- Enter your initial password in the field provided: default
Click OK. The EdgeMarc Admin landing page is displayed.
EdgeMarc Admin Landing Page
- Proceed to Changing Your Password.
Changing Your Password
Tip
Press the Erase button two times in quick succession on the rear panel of the EdgeMarc to reset the root or rouser account passwords to defaults. No service interruption is experienced.
Warning
Press the Erase button only twice; pressing three times restores the system to factory defaults.
Changing the Administration Password
To change the administrative password:
Choose Admin from the Configuration Menu.
Admin Landing Page
Scroll to Change Administrative Password and click Changed to open the Set Administrative User Password page.
Set Administrative User Password
- In the Current Password field, enter your current password.
- In the New Password field, enter a new password between six and eight characters long and that contains at least one non-repeating number.
- Re-enter the new password in the Confirm Password
- Click Submit.
Changing the Read-Only Password
Choose Admin from the Configuration Menu.
Admin Landing Page
Scroll to Change Read-Only Password and click Changed to open the Set Read-Only User Password page.
Set Read-Only User Password
- In the New Password field, enter a new password between six and eight characters long and that contains at least one non-repeating number.
- Re-enter the new password in the Confirm Password
- Click Submit.
Overview
Content Tools