In this section:

EdgeMarc 6000 MicroSD Card Specifications

MicroSD Card Features describes supported EdgeMarc 6000 microSD card features.

For information about configuring microSD card settings, see the EdgeMarc VOS User Guide in the Ribbon Communications Knowledgebase:
Ribbon Communications Knowledge base

Disclaimer
Some older and slower speed microSD cards do not support the entire MMC specification. These cards can dramatically reduce the card write speeds and the overall performance of the system. Recommended microSD cards are class 10, UHS 1 or faster.

MicroSD Card Features

FeatureDescription
File format

MS-DOS File Allocation Table FAT32 (Limited Support), Ext3

MicroSD card classes

Class 10, and UHS-1 Recommended default is Class 10 or faster.

Capacity

Maximum storage capacity: 32 GB per microSD card, 4 GB per file.

CLI

File Commands

  • delete = rm
  • copy = cp
  • rename = mv
  • edit = vi or cat

Directory Commands

  • create = mkdir
  • delete = rmdir
  • rename = mv
  MicroSD Card Commands
  • mount = sdcard mount
    In FAT32 format if the microSD card (or SD card) was not properly unmounted, this command will result in the following syslog message:
    “Volume was not properly unmounted. Some data may be corrupt. Please run fsck.” Since EdgeMarc no longer supports dos fsck tool, this must be fixed either on an EdgeMarc with pre-15.3.0 VOS or on an appropriate Windows system.
  • unmount = sdcard umount
  • format* = sdcard format
    Please note that Quick Format is not available in EdgeMarc versions 15.3.0 and above. A microSD card of 32 GB can take up to 35 minutes to be formatted.
  • name/rename SD card* = sdcard volume <volume name>
  • status* = sdcard check

*Supports only Ext3 file system

EdgeMarc files

You can copy the following types of files to and from the microSD card using the CLI: conf1, conf2,
syslog, pcap, mand logs, sys_report output.

TFTP server

The TFTP file server is used for endpoint configuration file storage.

FTP server

The FTP file server is used for endpoint configuration file storage.

Remote access

SSH into the EdgeMarc 6000 via SCP for remote access to the microSD card and files within the microSD card.

System alert for microSD card insert/removal

A system alert is issued when a microSD card is inserted or removed. The alert contains the timestamp of the event.

  • No labels